Airplane Design Software

Overall, I had a positive experience with GeoHECRAS. Some modeling tasks can still require extra time to adjust terrain data, check model inputs, and troubleshoot results. Improving the flexibility of these workflows and providing more guidance for new users would make the software even better, especially for students and researchers working on complex flood modeling projects. Review collected by and hosted on G2.com.

GeoHECRAS helps solve the challenges of setting up and running hydraulic models for flood analysis. As a graduate student working on flood modeling, I use it to combine terrain data, GIS information, and hydraulic modeling workflows to evaluate flood scenarios. It saves time during model preparation, improves visualization of flood behavior, and helps me compare different modeling conditions more efficiently. This is especially useful for my research on understanding flood risks and supporting better flood management decisions. Review collected by and hosted on G2.com.

What takes me the longest time is when I receive a dwg and then need to use it as an x ref, having control of editing the layers and then the layers within the block can take time which seems like a waste. Maybe the way we edit block layers can be done quicker or better, maybe a full set layer that really changes everything set within the block to my chosen layer. So perhaps a new command that overwrites the properties within the block to a chosen layer or a more streamlined approach for editing. Review collected by and hosted on G2.com.

Just the whole ease of use, once you get comfortable with it you can achieve a goal in different kinds of ways and most people do things differently. It benefits me by allowing me to add symbols and manipulate them easily to create a layout. Review collected by and hosted on G2.com.

The main thing i find challenging in NX is that some commands can feel overwhelming for new users.

Also , when working with heavy files or complex models, performance can slow down if the hardware is not strong enough, but for this type of issue siemens technical team is always there for quick support. Review collected by and hosted on G2.com.

Designcenter NX helps me create accurate designs, manage assemblies properly and generate clean drawings without spending unnecessary time.

It reduces repetitive work because once features and templates are set, you can reuse them easily. Review collected by and hosted on G2.com.

Large assemblies can slow things down at times and I've also experienced the software crashing. When you're new to Solid Edge, some of the more advanced features take a while to figure out, so there's definitely a learning curve. That said, beyond those points I don't have any major issues with and I'd still recommend giving it a try at least once. Review collected by and hosted on G2.com.

It helped us cut down the time we spend on repetitive design tasks and the constant back and forth on revisions. We can update models more fastest, reuse standard parts, prepare drawings and share without having to bounce between a bunch of different tools all the time. Its made daily desgin work feel a lot more manageable and easier to stay on top of. Review collected by and hosted on G2.com.

It took me a bit of time to get comfortable with some of the advanced tools like Smart Select and IFC Import, especially coming from a different CAD workflow. I’ve also run into occasional crashes or slowdowns on larger, more complex drawings. Some AutoCAD files particularly ones with certain plugins, custom fonts, or advanced blocks don’t always render perfectly, so I sometimes have to manually fix things. Review collected by and hosted on G2.com.

One of the biggest improvements for me is Smart Mouse and Smart Select. Earlier, I had to keep navigating through manually selecting objects one by one, especially when working on complex drawings. Now I can use quick gestures and intelligent selection options, which makes repetitive editing much faster and keeps my workflow moving.

Another feature I rely on is Smart Plotting. When I have multiple drawing sheets ready for release, I no longer need to print each one individually. Batch plotting saves a significant amount of time and reduces the chance of missing a sheet or using the wrong print settings.

IFC Import has also been valuable since I regularly receive files from teams using Revit. Earlier, exchanging data often required extra conversion steps. Now I can import IFC models directly, review the information, and continue my work without interrupting the workflow. Review collected by and hosted on G2.com.

One area that could be improved is performance when working with very large assemblies or complex models. As the number of components, configurations, and detailed features grows, loading, rebuilding, and editing can sometimes slow down and feel less responsive.

Some of the more advanced features also come with a learning curve. Troubleshooting certain rebuild errors or tracking down assembly performance issues can take time, especially for new users who are still getting familiar with the workflow.

I’d also like to see continued progress on large-assembly performance overall, along with faster file handling and more seamless collaboration and cloud-based workflows. Improvements in these areas would make an already capable mechanical design platform even more efficient and dependable for large product development projects. Review collected by and hosted on G2.com.

SOLIDWORKS helps me tackle design iteration, assembly coordination, and manufacturing documentation challenges. For example, when I was redesigning a conveyor Pull Cord Switch, I used parametric modelling and assemblies to quickly try out design changes and then update the drawings accordingly. This reduced development time and helped me achieve around a 20% cost reduction. Overall, it improves accuracy and keeps things consistent across 3D models, assemblies, BOMs, and manufacturing drawings. Review collected by and hosted on G2.com.

Civil 3D is a very useful tool for engineering and design work, and I use it regularly on projects. One area that could be improved—especially for people working on laptops—is overall performance.

Modern PCs and laptops often come with eight or more CPU cores, but Civil 3D still relies heavily on a single core for many operations. While a few features now take advantage of multiple cores, the list remains fairly limited. Until Civil 3D becomes more fully multithreaded, I think it will be hard to see a major improvement in overall performance, even with newer and more powerful hardware.

Overall, it’s a capable and useful program, but better use of modern multi-core CPUs would make a noticeable difference. Review collected by and hosted on G2.com.

I can always dynamically update my projects, and everything else will follow. I can also pull additional data anytime my client needs it. Review collected by and hosted on G2.com.

Automate is good for an idea of what is out there but not for review. Other than that, I like the program. Review collected by and hosted on G2.com.

Finding the peak flows for large areas is very helpful. It is very easy to change data for rainfall and time of concentration along with drainage area. Review collected by and hosted on G2.com.

Disliking is a strong term; I just think there’s always room for improvement.

When you assign a material to a design—let’s say wood—the model should better adopt that material’s texture and color. That would go a long way toward enhancing visualization in the early stages of the design process.

I also think the simulation side could be improved (CFD, static simulation, etc.) Review collected by and hosted on G2.com.

These are just a few points, and not limited to the following.

First is the collaboration aspect, where everyone can access the design wherever they are and make changes as needed.

Another benefit is design sharing without the risk of copying or downloading. By simply sharing a link with clients, they can view the design even on low-cost gadgets like tablets and phones.

It also removes the need to invest in an extremely expensive computer, and it negates the need to carry your computer everywhere. Review collected by and hosted on G2.com.

The only issue we have experienced with the software is that the DEM downloader stopped working for us. We instead had to download the DEM surfaces using other methods, but this was a minor inconvenience. Review collected by and hosted on G2.com.

GeoSTORM allows our firm to quickly obtain a time of concentration for use in hydrologic modeling of bridge openings. Review collected by and hosted on G2.com.

The major factor is the 'bug splat". Despite its versions and performance have upgraded tremendously over the years, SketchUp is still prone to crashes when models become overly heavy with un-purged components.. Also, complex geometry cannot be easily created without third-party plugins. For a tool that started as free/affordable option, the recurring pro subscription pricing may feel steep for solo practitioners. Review collected by and hosted on G2.com.

It creates a perfect bridge between 2D sketch and ideation and the final resulting 3D render. It can be seamlessly integrated into AutoCAD's workflow, AI's workflow and also as external exports for a cloud based softwares like Coohom. Review collected by and hosted on G2.com.

It is little bit laggy with Acad DWG having large number for solids and hatches, material rendering is not upto mark Review collected by and hosted on G2.com.

it solves all basic need of a mechanical+ architeural engineer need to conceptulaise the design and prepare a well document for engineering purposes, its trinity feature enables it to perform a powerfull role to collaborate all around Review collected by and hosted on G2.com.

There were some issues with the snap to lines/walls for drawing floor plans, initially all perfect right angles but then it all started creating weird angles and I couldn't find a super clear answer of how to fix that simply and make sure the walls had right angles. Review collected by and hosted on G2.com.

I need to be able to make simple floor plans for leasing documents that are less complicated than the actual blueprints Review collected by and hosted on G2.com.

it was good actually not need to make change,butit can be improved some what Review collected by and hosted on G2.com.

ActCAD BIM performs well with large drawing files, integrates multiple features, is cost-effective, and has frequent updates. It also supports team collaboration. Review collected by and hosted on G2.com.

One area that could be improved is the construction drawing customization. I would like more flexibility in editing drawing templates and title blocks without requiring a higher-tier subscription. Review collected by and hosted on G2.com.

Coohom helps solve the challenge of communicating design ideas to clients. Instead of relying on 2D drawings or trying to explain concepts verbally, I can show clients realistic 3D renderings of their future home. This helps them make decisions with confidence, reduces misunderstandings during the renovation process, and minimizes costly design changes after work has started. It also allows me to complete design proposals much faster, improving efficiency and helping me serve more clients without compromising quality. Review collected by and hosted on G2.com.

While importing and exporting, I exported a GstarCAD file to SketchUp and noticed that the scale changed. I’m not sure whether this is a glitch in SketchUp or in GstarCAD. Review collected by and hosted on G2.com.

It is much lighter than AutoCAD. I used the Student version and found it helpful. Later, I got to know that the pricing of GstarCAD is much lower than that of AutoCAD. In the future, if I need to use it as a commercial version, I will definitely prefer GstarCAD because it is economical and provides the same features as AutoCAD. Review collected by and hosted on G2.com.

I still can't find anything I don't like about Autodesk Fusion; it's robust software that's relatively easy for my high school students to learn. Review collected by and hosted on G2.com.

If you are using Fusion 360 for the very first time and with no previous knowledge like me, I highly recommend watching video tutorials and completing Autodesk Academy classes to understand its features and working spaces better. Review collected by and hosted on G2.com.

I am a high school teacher, and one of my subjects is digital fabrication. I introduced my students to this fantastic software during the course, and after a couple of trial and error processes, they can design and print 3D models and use their designs to laser cut. Review collected by and hosted on G2.com.

The main thing I dislike is that some features and workflows are not as smooth as they could be compared with more mature CAD platforms. Performance can also become noticeable when working with large or complicated drawings. Some commands and settings take a little time to get used to, especially when switching from another CAD system.

I would also like to see better automation and customization options, along with a more modern and consistent user experience across different tools. For basic 2D drafting it works well, but there is still room to improve the overall workflow for users working on more complex projects. Review collected by and hosted on G2.com.

DraftSight mainly solves the need for a practical 2D CAD tool for creating, editing, and reviewing DWG drawings. It helps me work with existing DWG files without having to completely change my workflow or spend a lot of time learning a new system.

It is useful for day-to-day drafting, drawing modifications, documentation, and sharing drawings with customers and other teams. The biggest benefit for me is that it keeps the 2D CAD work relatively simple and familiar, while still providing the tools needed for regular engineering and drafting requirements and getting good support. Review collected by and hosted on G2.com.

Steep Learning Curve - especially those transitioning from AutoCAD, find the interface and workflow less intuitive and the commands to be more complex or "clunky" for simple tasks. Review collected by and hosted on G2.com.

It can natively read and write a vast number of file formats, including DWG, point clouds, reality meshes, and GIS data (like Esri File Geodatabase), often without requiring a lossy conversion. It can even open a DWG file without translating it, which is unique. Review collected by and hosted on G2.com.

I wish taking measurements was much easier. A more practical measurement tool on the same screen would be helpful. Review collected by and hosted on G2.com.

We are an R&D company, and Shapr3D helps us quickly turn our ideas into 3D designs and prototypes. Review collected by and hosted on G2.com.