It create 2d sketch into 3d very quick with its feature of just drag arrow which save time to use command for extrude purpose also it can cut material by reversing arrow Review collected by and hosted on G2.com.

It create multiple files if I import step files in software which create mess everywhere where step file located so i suggest it will be save in temp folder for clean Review collected by and hosted on G2.com.

Ii is very simple tool to design product, fixtures, gauges, stamping and punching tools. I like surfacing functions due to much more easier job than CATIA. Review collected by and hosted on G2.com.

When I do the assembly there is no option to import step file directly. Annual service pack upgrade is too expensive to me. Due to that I prefer Solid Works. Review collected by and hosted on G2.com.

We use Siemens Solid Edge as the backbone of our product and factory development lifecycle, from concept through to commissioning. All machinery layouts, custom equipment designs, and factory expansion models are developed in Solid Edge, allowing us to rapidly iterate designs, validate fit within real-world constraints, and maintain a single, accurate digital representation of our production environment.

By integrating Simcenter FLOEFD directly within Solid Edge, we move beyond traditional CAD into simulation-driven design. We actively simulate airflow, temperature distribution, and humidity behaviour across our processing and packaging environments—critical for drying performance, product consistency, and hygiene compliance. This enables us to identify issues such as condensation risk, airflow inefficiencies, and thermal inconsistencies before physical implementation.

The value this delivers is substantial:

Reduced risk: Problems are identified and solved digitally before capital is committed or equipment is installed.

Faster decision-making: Design iterations that would take weeks physically are completed in hours.

Optimised performance: Equipment and facility layouts are engineered for real operating conditions, not assumptions.

Cost efficiency: Minimises rework, avoids overdesign, and improves ROI on major capital investments.

Scalable digital foundation: As we expand, our full factory exists as a validated digital twin, supporting future automation, upgrades, and process optimisation.

In short, Solid Edge combined with FLOEFD allows us to design smarter, de-risk faster, and execute expansion projects with a level of confidence and precision that would not be achievable with CAD alone.

The UI has been greatly improved in its feel and operation. Making it more modern and user friendly. Really happy about the dark mode addition as well.

In overall the performance has improved on the operation of the software. Enjoying the performance mode it has to offer.

Pricing is ok but feel like better options and bundles should be created to allow for adding more employees easier.

The Siemens Academy use to be the go to but needs more work done, cannot wait for the revamp to be completed. There are tons of resources online that are helpful when required.

New AI features are really helpful for speeding up daily use!

Keep adding more please! Review collected by and hosted on G2.com.

It really is a one of a kind Digital creation software that can be used in all industries globally. Its hard to dislike since it is so versatile and adaptable. But if I had to choose something, maybe not utilizing enough multi core threading would be one. Review collected by and hosted on G2.com.

The most distinctive feature of Solid Edge is how it bridges the gap between direct modeling and history-based (ordered) parametric design. It lets engineers edit imported, non-native geometry or tweak complex parts on the fly, without having to worry about broken feature trees or sitting through long model regenerations. Review collected by and hosted on G2.com.

Advanced Surfacing Limitations: While excellent for mechanical design, sheet metal, and structural framing, its complex organic surfacing tools fall short of high-end surface modeling suits like CATIA or Rhino. Review collected by and hosted on G2.com.

Solid Edge is a powerful CAD platform that combines intuitive parametric design with Synchronous Technology, making it easy to create new models and quickly modify existing or imported designs. Its strong assembly, sheet metal, and manufacturing capabilities help improve engineering productivity while reducing design time. Review collected by and hosted on G2.com.

Solid Edge has a steeper learning curve than some competing CAD packages, particularly when using its advanced modeling and assembly features. It also has a smaller user community and fewer third-party resources than more widely adopted platforms like SolidWorks, which can make finding tutorials, add-ins, and experienced users more challenging. Review collected by and hosted on G2.com.

For me, the single best core feature of Solid Edge is still Synchronous Technology. In contrast to traditional history-based (ordered) CAD systems—where modifying an early feature can cause the downstream feature tree to break—synchronous modeling allows you to edit the geometry directly, in real time. Review collected by and hosted on G2.com.

Switching between Synchronous (direct) and Ordered (history-tree) modes often means changing your design approach halfway through a project. When I open complex models created by someone else that mix both paradigms, tracing parameter dependencies and figuring out what will break which relations can turn into a tedious troubleshooting exercise. On organic shapes or highly complex, intersecting surfaces, the Steering Wheel snap controls can also feel erratic at times, which ends up pushing me back to more traditional sketch-based workflows. Review collected by and hosted on G2.com.

Reusable component library — quick drag-and-drop access to standard parts (fasteners, bearings, etc.) without rebuilding them from scratch

Integration with the synchronous/ordered modeling workflow — it plays nicely whether you're doing history-based or direct editing

Searchable, categorized parts tree — easier to navigate than digging through folders manually

Custom library support — you can add your own standardized brackets/clips/etc., which given your 3D printing and reverse-engineering work might actually be the most relevant bit — once you've modeled that L-shaped bracket profile, you could drop it into a custom library for reuse Review collected by and hosted on G2.com.

Library organization can get messy — once you add a lot of custom parts, navigation and search within DesignCenter reportedly gets clunky compared to dedicated PDM tools

Preview rendering lag — some users report thumbnails/previews loading slowly for larger libraries

Limited metadata/tagging — searching by custom properties isn't as flexible as people want, making it harder to find a specific part among hundreds

Learning curve for custom library setup — configuring your own reusable parts/families takes more setup effort than expected before it "just works"

Version sync issues — in team environments, keeping shared libraries consistent across multiple users/machines can be a pain point Review collected by and hosted on G2.com.

I use Designcenter Solid Edge for designing 3D models, especially for sheet metal, parts, and systems with electronics. I appreciate how it helps create very close to accurate mechanical drawings with minimal tweaks needed. I like being able to visualize the system before starting a project, as it allows us to integrate electronics and mechanical components together in our mechatronics lab. The assembly system with magnetic snap is intuitive, and the UI is nicely done. I enjoy being able to perform FEA, topology optimization, and parametric analysis directly in Designcenter Solid Edge without needing to use another tool, which simplifies the process significantly. Review collected by and hosted on G2.com.

I think the way that we can define dimensions in Designcenter Solid Edge could be improved. Also we can imporve the way to naviagte to a certain feature right now it takes a while to learn how to get there. Maybe it can follow the same format as other software? Review collected by and hosted on G2.com.

Designcenter Solid Edge has a clean and intuitive interface that makes creating and editing 3D models efficient. I especially appreciate the parametric modeling capabilities, the integration with engineering workflows, and the overall stability when working on complex assemblies. It helps improve productivity while maintaining design accuracy and collaboration across projects. Review collected by and hosted on G2.com.

While Designcenter Solid Edge is a capable and reliable CAD solution, there is still room for improvement. Some advanced features have a learning curve, and the interface can occasionally feel outdated compared to newer competitors. Performance may also slow down when working with very large or highly detailed assemblies, and finding certain tools can take time for new users. Overall, these are minor drawbacks compared to the software’s strengths. Review collected by and hosted on G2.com.

Solid edge software is very good in terms of complex design. I am using it since 4 years. It is a very fascinating interface and assembly is very easy as well as sheet metal and surfacing is very smoothly occurs. Review collected by and hosted on G2.com.

There is nothing in solid edge which restricts you to design and develope a complex parts. I have been using it from last 4 years and every time it starts without any problem. Review collected by and hosted on G2.com.