I like AutoCAD for its high accuracy and ease of editing designs, which allows for quickly modifying drawings and creates professional-quality engineering plans. It helps solve problems like manual drafting errors, lack of accuracy, and difficulty in modifying designs, making designing, editing, and sharing engineering drawings faster, clearer, and more precise. The high accuracy is crucial in engineering and construction as it allows designs to be made to exact measurements, preventing big problems on site. The ease of editing saves a lot of time and effort during project revisions. Review collected by and hosted on G2.com.

Some things in AutoCAD that don’t work as well or could be improved are: It has a steep learning curve for beginners, especially understanding commands and shortcuts. The software is expensive, which can be difficult for students. It needs a good system (RAM/graphics) to run smoothly with large drawings. Working in 3D is less intuitive compared to some modern CAD tools. Overall, it’s powerful, but it could be more beginner-friendly and affordable. Review collected by and hosted on G2.com.

I love the precision of AutoCAD and how easy it is to manage complex layers, especially during big collaborative projects. The ability to isolate specific layers is a lifesaver for keeping things organized. The block library feature is huge for us, allowing my friend Sricharan and me to save hours by dragging and dropping pre-made parts from our custom library. This feature not only saves time but also helps standardize our work, ensuring every schematic looks exactly the same, regardless of who worked on it. It's pretty much indispensable for us due to its extreme accuracy and customizability. Review collected by and hosted on G2.com.

Honestly if I have to point out a negative it would definitely be how resource heavy the software can get especially when we are working on really large files with a ton of layers it happens quite a bit where my friend Reshma will try to open a massive complex drawing on her laptop and the whole system just freezes up or starts lagging which is super frustrating when we are on a tight deadline. Also the licensing cost is getting pretty steep for us lately I remember discussing this with Sricharan just the other day and we both felt that the subscription model is becoming a bit of a financial burden compared to the old perpetual licenses we used to have so yeah better performance optimization for average computers and maybe more flexible pricing would make a huge difference for our team Review collected by and hosted on G2.com.

I have used AutoCAD's Fusion 360 during my coursework, and it was essential for creating drawings and structures for 3D printing. AutoCAD helped me solve visualization problems, effectively translating ideas from my mind into precise, fabrication-ready designs. I really appreciate the precision and control it offers while designing, which is crucial for accuracy in 3D printing. Additionally, the software helps me organize layers efficiently, making the designing process much easier. It also supported me in various assignments, allowing for easy editing without needing to change entire designs. The initial setup was quite easy, making it accessible from the start. Review collected by and hosted on G2.com.

When trying to create drawings with multiple parts, it becomes complex to handle and the software is slow. Additionally, when I used to handle complex drawings, the software used to misbehave, whereas my friends using SolidWorks were able to do it. Review collected by and hosted on G2.com.

I like AutoCAD's infinite space where I can draw anything, which is great for creating detailed design and plan layouts of buildings. It makes it easy to explain detailed plans since I am a civil engineer. I also appreciate the many features and shortcuts that make it easy to draw any plan, like building foundations, beams, columns, and elevations. I've been using this software for more than two years, and I can't think of my life without it. It's the only source of income for me, which shows how reliant and integrated it is in my work. The initial setup of AutoCAD was easy for me, indicating its user-friendly nature. Till now, I'd give AutoCAD a 10 out of 10. Review collected by and hosted on G2.com.

I find AutoCAD's 3D visualization a little bit complex and difficult to use. It's also a bit time-consuming and hard for me to draw any complex type of structure. Review collected by and hosted on G2.com.

AutoCAD is an excellent tool for designing machines and is especially helpful for engineering students. I appreciate AutoCAD mainly for its precision and professional standards. It enables me to create highly accurate drawings with exact dimensions, which deepens my understanding of how real-world designs are developed. I also value the fact that AutoCAD is widely used in the industry, making the time I spend learning it feel like a worthwhile investment for my future career. Additionally, features like layers, blocks, and shortcuts make drafting much faster once I become familiar with them. Review collected by and hosted on G2.com.

One aspect I find challenging about AutoCAD is its steep learning curve, especially for beginners. In the beginning, trying to remember all the commands and shortcuts can be quite confusing. The software also tends to use a lot of system resources, which means it can lag on computers with lower specifications. On top of that, even minor errors, such as selecting the wrong units or layers, can impact the whole drawing. As an intern, this can be particularly frustrating. Review collected by and hosted on G2.com.

is how precise and flexible it is. You can create highly accurate drawings down to exact measurements, which is essential for engineering, architecture, and design work. Review collected by and hosted on G2.com.

It can also be resource-heavy, meaning it sometimes runs slowly on less powerful computers, particularly when working with large or complex drawings. Review collected by and hosted on G2.com.

I primarily use AutoCAD for preparing and reviewing 2D drawings, and it's especially useful for quick drafting, mark-ups, and coordination during the design and execution stages. It helps maintain drawing accuracy, consistency, and clear communication between different project stakeholders. I like its reliability and precision; it's very stable for day-to-day drafting and works well even on complex drawings. I appreciate the ease of making quick edits, using layers effectively, and maintaining drawing standards, which saves a lot of time. AutoCAD integrates smoothly with other design and BIM tools, making it a dependable part of the overall design and coordination workflow. The initial setup was fairly easy, with a straightforward installation and licensing process, and the familiar interface allowed for quick onboarding and productivity ramp-up. Review collected by and hosted on G2.com.

AutoCAD can feel a bit limited for complex 3D workflows, and handling very large or heavily referenced files can sometimes affect performance. The licensing cost is also on the higher side compared to some alternatives. Review collected by and hosted on G2.com.

AutoCAD has been a great tool for many professionals and evolves based the most recent technology. I love the legacy UI and how they integrate new tools seamlessly. It has become more powerful by integrating new features that allows to speed the design phase Review collected by and hosted on G2.com.

3D designing is the best yet. It requires extra steps and it makes it harder. Review collected by and hosted on G2.com.

I like that AutoCAD has a lot of features and shortcuts, making it easy and fast to generate drawings. It's also very efficient for creating designs quickly. The initial setup was very easy, and I appreciate how it helps me generate preliminary layout designs and create SLDs. It's easy to get things done in a short time with AutoCAD. Review collected by and hosted on G2.com.

When I import layers from Google Earth, I need to use AutoCAD Civil; I can't just use AutoCAD. It would be nice to have AutoCAD also have that feature. Maybe add a feature for 'import' and 'export' to AutoCAD. Review collected by and hosted on G2.com.

I use AutoCAD to create precise 2D drawings and 3D models for various projects, and I appreciate its ability to draft plans, technical diagrams, and layouts with accuracy and efficiency. I like AutoCAD's precision and flexibility, where every line, angle, and dimension can be controlled exactly. The command-based workflow, layers, and powerful tools make organizing and modifying complex designs smooth. It's great for both 2D drafting and 3D modeling. I'm particularly fond of its layer management, which helps organize drawings by separating different components and keeps projects clean and manageable. Object snaps ensure accurate endpoints, midpoints, and intersections, which eliminates guesswork and prevents errors. The dimensioning tools that automatically generate precise measurements and keep associativity help save time and prevent mistakes. I also appreciate the ability to customize commands, use shortcuts, and automate tasks with scripts, which boosts productivity and makes my workflow very efficient. The transition from other drafting tools to AutoCAD was driven by its reliability, precision, and the industry-standard features it provides. Review collected by and hosted on G2.com.

AutoCAD can be improved in a few areas: it has a steep learning curve for beginners, can feel slow when working with large files, and its subscription cost is quite high. Some 3D features also feel less intuitive compared to modern 3D modeling software. AutoCAD’s 3D tools feel less intuitive because navigation, solid editing, and surface modeling require many separate commands and don’t flow as smoothly as modern parametric systems. Tools like PressPull, UCS management, and Boolean operations can feel cumbersome. Review collected by and hosted on G2.com.