# How do I ensure my weldments always accept weld at their interactions.

I have models where cylinders are welded to cylinders. Inventor will not allow me to add weld in between these features. The cylinders are perpendicular to each other.

##### Post Metadata
- Posted at: over 6 years ago
- Author title: Engineering Supervisor
- Net upvotes: 1


## Comments
### Comment 1

This is hard to answer without images and more detail about your tube OD. And ID., but if the tubes are mated tangent to each other it should be as simple as a fillet weld, selecting the OD of both tubes (one in each bead set) and picking you weld size. The welds won’t go all the way around but should generate something. The Inventor forums would provide a better medium for asking this question.

##### Comment Metadata
- Posted at: over 6 years ago
- Author title: Mechanical Drafter




## Related Product
[Inventor](https://www.g2.com/products/inventor/reviews)

## Related Category
[Mechanical Computer-aided Design (MCAD)](https://www.g2.com/categories/mechanical-computer-aided-design-mcad)

## Related discussions
- [How well does Trello scale into a larger team?](https://www.g2.com/discussions/1-how-well-does-trello-scale-into-a-larger-team)
  - Posted at: about 13 years ago
  - Comments: 6
- [Can we please add a new section](https://www.g2.com/discussions/2-can-we-please-add-a-new-section)
  - Posted at: about 13 years ago
  - Comments: 0
- [Quantifiable benefits from implementing your CRM](https://www.g2.com/discussions/quantifiable-benefits-from-implementing-your-crm)
  - Posted at: about 13 years ago
  - Comments: 4