# Does any SD-WAN actually keep VPN or VoIP sessions alive through failover without extra configuration, or is &#39;seamless failover&#39; just a spec sheet claim?

I'm doing vendor comparisons right now (Peplink, Meraki, a couple others including Bigleaf), and "seamless failover" keeps showing up as a feature on every spec sheet. But when I dig into it, some of these seem to require BGP or manual policy config to actually deliver on that promise, and I'm not sure which ones do it out of the box. For anyone who's actually tested this in production, which vendors genuinely keep an active VPN tunnel or VoIP call alive through a real failover event, without extra setup?

##### Post Metadata
- Posted at: about 2 months ago
- Net upvotes: 2


## Comments
### Comment 1

I can speak with confidence for how Bigleaf does it, and with a bit more caution on the other two, since specs change and I&#39;d rather you verify current behavior directly with them than take a competitor claim secondhand.

Bigleaf&#39;s version of seamless failover genuinely works out of the box, no BGP, no policy configuration required. The mechanism, which we call same-IP failover, is that your public IP is issued from Bigleaf&#39;s own gateway infrastructure rather than from an ISP. All traffic tunnels to our gateways before it reaches the internet, so when a circuit fails and traffic reroutes to a healthier one, the IP simply doesn&#39;t change. There&#39;s nothing for a VoIP call or VPN tunnel to notice. That&#39;s structurally different from BGP-based approaches, where you&#39;d be standing up and maintaining your own address advertisement to get the same result. It&#39;s a function of the architecture itself, not a checkbox feature sitting on top of a normal multi-WAN setup, which is exactly why it&#39;s worth testing rather than trusting a spec sheet on any vendor&#39;s part, ours included.

On Peplink and Meraki specifically, since you named them: based on their current published architecture, Meraki relies on firewall-based configuration and manual traffic policy setup, and doesn&#39;t have a built-in same-IP mechanism — failover there typically does change the IP. Peplink supports both wired and wireless failover, which is a real strength, but its approach (SpeedFusion bonding) is a different mechanism entirely — it aggregates circuits into a combined pipe rather than issuing a stable IP from separate infrastructure — and it&#39;s not built to preserve a session&#39;s IP through a circuit switch the way an overlay like this does. I&#39;d still confirm both of those directly with current reps or docs before treating it as settled, since vendor capabilities do shift.

Given you&#39;re already doing vendor comparisons, the actual test worth running in a POC is simple: start an active VoIP call or VPN session, physically pull the primary circuit, and watch whether the session survives or drops. That&#39;s a more reliable signal than any spec sheet, from any vendor.

Same-IP Address Failover - https://www.bigleaf.net/same-ip-address-failover/ — the mechanism in detail.

Seamless Failover Demo - https://www.bigleaf.net/resources/bigleaf-networks-seamless-failover-demo/ — a recorded demonstration of exactly the kind of test described above.

Bigleaf vs. Failover - https://www.bigleaf.net/blog/bigleaf-vs-failover/ — more on why &quot;the circuit switched&quot; and &quot;the session survived&quot; are separate claims worth checking independently.

##### Comment Metadata
- Posted at: about 2 months ago
- Author title: Digital Marketing Manager




## Related Product
[Bigleaf Networks](https://www.g2.com/products/bigleaf-networks/reviews)

## Related Category
[SD-WAN](https://www.g2.com/categories/sd-wan)

## Related discussions
- [How well does Trello scale into a larger team?](https://www.g2.com/discussions/1-how-well-does-trello-scale-into-a-larger-team)
  - Posted at: over 13 years ago
  - Comments: 6
- [Can we please add a new section](https://www.g2.com/discussions/2-can-we-please-add-a-new-section)
  - Posted at: over 13 years ago
  - Comments: 0
- [Quantifiable benefits from implementing your CRM](https://www.g2.com/discussions/quantifiable-benefits-from-implementing-your-crm)
  - Posted at: over 13 years ago
  - Comments: 4


