# SOLIDWORKS, Mastercam, Inventor vs Onshape Comparison

| | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Star Rating** | 4.5 out of 5 | 4.1 out of 5 | 4.4 out of 5 | 4.7 out of 5 | 
| **Total Reviews** | 643 | 26 | 440 | 695 | 
| **Largest Market Segment** | Small-Business (44.3% of reviews) | Mid-Market (50.0% of reviews) | Mid-Market (42.7% of reviews) | Small-Business (79.0% of reviews) | 
| **Entry Level Price** | No pricing available | No pricing available | $2085 1 year | $1,500.00 1 User Per Year | 

---
## Top Pros & Cons

### SOLIDWORKS

Pros:
- Ease of Use (34 reviews)
- Features (28 reviews)

Cons:
- Performance Issues (16 reviews)
- Slow Performance (15 reviews)

### Mastercam

Pros:
- Ease of Use (12 reviews)
- Tooling (6 reviews)

Cons:
- Difficult Learning Curve (11 reviews)
- Feature Limitations (5 reviews)

### Inventor

Pros:
- Ease of Use (2 reviews)
- 3D Modeling (1 reviews)

Cons:
- Assembly Issues (1 reviews)
- Complexity (1 reviews)

### Onshape

Pros:
- Ease of Use (28 reviews)
- Collaboration (22 reviews)

Cons:
- Missing Features (18 reviews)
- Lack of Features (10 reviews)

---
## Ratings Comparison
| Rating | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
  | **Meets Requirements** | 8.8 (535 reviews) | 9.1 (21 reviews) | 8.8 (376 reviews) | 8.4 (597 reviews) | 
  | **Ease of Use** | 8.6 (540 reviews) | 8.2 (21 reviews) | 8.4 (377 reviews) | 9.0 (601 reviews) | 
  | **Ease of Setup** | 8.3 (112 reviews) | 6.9 (6 reviews) | 7.9 (107 reviews) | 9.3 (179 reviews) | 
  | **Ease of Admin** | 8.0 (47 reviews) | 7.2 (6 reviews) | 7.7 (99 reviews) | 9.1 (127 reviews) | 
  | **Quality of Support** | 8.2 (475 reviews) | 7.9 (19 reviews) | 8.1 (346 reviews) | 9.3 (587 reviews) | 
  | **Has the product been a good partner in doing business?** | 8.3 (47 reviews) | 8.3 (6 reviews) | 8.2 (94 reviews) | 9.3 (126 reviews) | 
  | **Product Direction (% positive)** | 8.6 (529 reviews) | 8.8 (20 reviews) | 8.3 (371 reviews) | 9.5 (578 reviews) | 

---
## Pricing

### SOLIDWORKS

#### Entry-Level Pricing

No pricing available

#### Free Trial

No information available

### Mastercam

#### Entry-Level Pricing

No pricing available

#### Free Trial

No information available

### Inventor

#### Entry-Level Pricing

Plan: 1 Year

Price: $2085 1 year

Description: Choose online store or reseller or call toll-free 1-844-821-0545.


[Browse all 4 editions](https://www.g2.com/products/inventor/pricing)

#### Free Trial

Yes

### Onshape

#### Entry-Level Pricing

Plan: Onshape Standard

Price: $1,500.00 1 User Per Year

Description: For the individual user or small team who only needs basic data management.

Key Features:
- Part & Assembly Modeling
- Drawings
- Runs on Web & Mobile

[Browse all 4 editions](https://www.g2.com/products/onshape/pricing)

#### Free Trial

Yes

---
## Features Comparison By Category

### Computer-Aided Manufacturing (CAM)

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 8.7/10 | 53 |
| **Mastercam** | 8.6/10 | 20 |
| **Inventor** | N/A | N/A |
| **Onshape** | N/A | N/A |

#### CAD to CAM

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **CAD-CAM Import** | 9.0 (42 reviews) | 8.8 (20 reviews) | Not enough data | Not enough data | 
| **CAM Data Exchange** | 8.8 (42 reviews) | 8.1 (18 reviews) | Not enough data | Not enough data | 
| **CAD/CAM Compatibility** | 8.9 (43 reviews) | 8.2 (20 reviews) | Not enough data | Not enough data | 

#### CNC Programming

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **CNC Workflows** | 8.7 (39 reviews) | 8.6 (19 reviews) | Not enough data | Not enough data | 
| **CNC Feature Recognition** | 8.6 (38 reviews) | 8.6 (19 reviews) | Not enough data | Not enough data | 
| **Programming Control** | 8.4 (37 reviews) | 8.3 (20 reviews) | Not enough data | Not enough data | 

#### Machining

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Job Set-up** | 8.6 (39 reviews) | 8.7 (19 reviews) | Not enough data | Not enough data | 
| **Operations** | 8.7 (39 reviews) | 8.7 (20 reviews) | Not enough data | Not enough data | 
| **Tooling and Toolpaths** | 8.8 (39 reviews) | 9.1 (20 reviews) | Not enough data | Not enough data | 

### General-Purpose CAD

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 8.8/10 | 112 |
| **Mastercam** | N/A | N/A |
| **Inventor** | 8.2/10 | 38 |
| **Onshape** | 8.4/10 | 240 |

#### Design

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Drawing** | 9.5 (107 reviews) | Not enough data | 8.6 (37 reviews) | 8.8 (233 reviews) | 
| **Modeling** | 9.4 (107 reviews) | Not enough data | 8.9 (37 reviews) | 9.3 (236 reviews) | 
| **Visualize ** | 9.2 (103 reviews) | Not enough data | 8.5 (38 reviews) | 9.0 (231 reviews) | 
| **Rendering** | 8.1 (100 reviews) | Not enough data | 7.6 (35 reviews) | 7.4 (194 reviews) | 

#### Edit

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **File Import ** | 8.5 (98 reviews) | Not enough data | 8.2 (37 reviews) | 8.6 (230 reviews) | 
| **Push/Pull** | 8.4 (90 reviews) | Not enough data | 7.4 (36 reviews) | 8.1 (195 reviews) | 
| **Views** | 9.3 (101 reviews) | Not enough data | 8.0 (37 reviews) | 8.9 (225 reviews) | 
| **Grips ** | 8.3 (85 reviews) | Not enough data | 7.7 (36 reviews) | 7.9 (198 reviews) | 

#### Collaboration

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Annotate** | 8.6 (94 reviews) | Not enough data | 8.1 (36 reviews) | 8.2 (211 reviews) | 
| **Documentation ** | 9.0 (96 reviews) | Not enough data | 8.6 (36 reviews) | 8.3 (221 reviews) | 
| **Data Extract** | 8.4 (90 reviews) | Not enough data | 8.2 (36 reviews) | 8.1 (204 reviews) | 

### CAD Libraries

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 8.9/10 | 35 |
| **Mastercam** | N/A | N/A |
| **Inventor** | N/A | N/A |
| **Onshape** | N/A | N/A |

#### Library

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Categorize** | 8.9 (29 reviews) | Not enough data | Not enough data | Not enough data | 
| **Search** | 8.6 (28 reviews) | Not enough data | Not enough data | Not enough data | 
| **Deduplication** | 8.4 (28 reviews) | Not enough data | Not enough data | Not enough data | 
| **Feedback** | 8.6 (23 reviews) | Not enough data | Not enough data | Not enough data | 

#### CAD

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Types** | 8.8 (24 reviews) | Not enough data | Not enough data | Not enough data | 
| **Models** | 9.4 (30 reviews) | Not enough data | Not enough data | Not enough data | 
| **Compatibility** | 9.1 (29 reviews) | Not enough data | Not enough data | Not enough data | 

#### Integration

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Catalogs** | 8.5 (26 reviews) | Not enough data | Not enough data | Not enough data | 
| **CAD & PLM** | 9.6 (29 reviews) | Not enough data | Not enough data | Not enough data | 
| **ERP** | 8.6 (25 reviews) | Not enough data | Not enough data | Not enough data | 

### CAD Data Exchange

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 8.8/10 | 34 |
| **Mastercam** | N/A | N/A |
| **Inventor** | N/A | N/A |
| **Onshape** | N/A | N/A |

#### Data

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **3D Format** | 9.3 (29 reviews) | Not enough data | Not enough data | Not enough data | 
| **Data Quality** | 8.8 (27 reviews) | Not enough data | Not enough data | Not enough data | 
| **Extra Information** | 8.3 (26 reviews) | Not enough data | Not enough data | Not enough data | 
| **Standard Format** | 9.0 (27 reviews) | Not enough data | Not enough data | Not enough data | 
| **Translate** | 8.3 (24 reviews) | Not enough data | Not enough data | Not enough data | 
| **Validation** | 8.7 (25 reviews) | Not enough data | Not enough data | Not enough data | 

#### Logistics

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Integrate** | 9.1 (25 reviews) | Not enough data | Not enough data | Not enough data | 

### Additive Manufacturing

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 7.9/10 | 66 |
| **Mastercam** | N/A | N/A |
| **Inventor** | N/A | N/A |
| **Onshape** | 7.9/10 | 169 |

#### File Support - Additive Manufacturing

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **STL Compatible** | 8.7 (61 reviews) | Not enough data | Not enough data | 8.6 (160 reviews) | 
| **3MF Compatible** | 8.5 (47 reviews) | Not enough data | Not enough data | 7.9 (78 reviews) | 
| **OBJ Compatible** | 8.4 (52 reviews) | Not enough data | Not enough data | 7.9 (100 reviews) | 

#### File Editing - Additive Manufacturing

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Mesh Repair** | 7.5 (55 reviews) | Not enough data | Not enough data | 6.0 (84 reviews) | 
| **File Editing** | 8.6 (60 reviews) | Not enough data | Not enough data | 8.4 (125 reviews) | 

#### Software Integrations - Additive Manufacturing

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Standalone Slicer** | 7.6 (49 reviews) | Not enough data | Not enough data | 5.7 (83 reviews) | 
| **Inetgrated 3D Modeling** | 8.8 (58 reviews) | Not enough data | Not enough data | 8.8 (130 reviews) | 

#### Software Type - Additive Manufacturing

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Cloud-based Platform** | 7.7 (48 reviews) | Not enough data | Not enough data | 9.6 (160 reviews) | 
| **Downloadable Application** | 8.6 (53 reviews) | Not enough data | Not enough data | Feature Not Available | 

#### Generative AI - Additive Manufacturing

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **AI Text-to-Image** | 6.0 (20 reviews) | Not enough data | Not enough data | Feature Not Available | 
| **AI Text-to-3D** | 6.1 (20 reviews) | Not enough data | Not enough data | Feature Not Available | 

#### Building Preparation - Additive Manufacturing

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Material Management** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Building Simulation** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Slicing Optimization** | Not enough data | Not enough data | Not enough data | Not enough data | 

### Product Data Management (PDM)

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | N/A | N/A |
| **Mastercam** | N/A | N/A |
| **Inventor** | N/A | N/A |
| **Onshape** | 8.5/10 | 48 |

#### Metadata

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Repository** | Not enough data | Not enough data | Not enough data | 9.2 (40 reviews) | 
| **Taxonomy** | Not enough data | Not enough data | Not enough data | 7.8 (37 reviews) | 
| **Types** | Not enough data | Not enough data | Not enough data | 8.4 (37 reviews) | 

#### Data Management

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Version Control** | Not enough data | Not enough data | Not enough data | 9.2 (47 reviews) | 
| **Alignment** | Not enough data | Not enough data | Not enough data | 8.3 (40 reviews) | 
| **Workflows** | Not enough data | Not enough data | Not enough data | 8.3 (43 reviews) | 
| **Lifecycle** | Not enough data | Not enough data | Not enough data | 8.0 (41 reviews) | 

#### Generative AI

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **AI Text Summarization** | Not enough data | Not enough data | Not enough data | Feature Not Available | 
| **AI Image-to-Text** | Not enough data | Not enough data | Not enough data | Feature Not Available | 

### CAD Viewers

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 9.0/10 | 49 |
| **Mastercam** | N/A | N/A |
| **Inventor** | N/A | N/A |
| **Onshape** | 8.7/10 | 155 |

#### File Options

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Import files** | 8.9 (44 reviews) | Not enough data | Not enough data | 8.9 (146 reviews) | 
| **Export files** | 9.1 (43 reviews) | Not enough data | Not enough data | 9.1 (147 reviews) | 
| **View 2D files** | 9.1 (43 reviews) | Not enough data | Not enough data | 8.1 (135 reviews) | 
| **View 3D files** | 9.3 (44 reviews) | Not enough data | Not enough data | 9.3 (145 reviews) | 
| **Batch convert files** | 8.3 (35 reviews) | Not enough data | Not enough data | 7.8 (98 reviews) | 
| **File size** | 8.3 (41 reviews) | Not enough data | Not enough data | 8.5 (133 reviews) | 

#### Tools

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Dimensioning tools** | 9.5 (43 reviews) | Not enough data | Not enough data | 8.8 (149 reviews) | 
| **Change units** | 9.1 (41 reviews) | Not enough data | Not enough data | 9.1 (142 reviews) | 
| **3D/solid modeling tools** | 9.2 (43 reviews) | Not enough data | Not enough data | 9.1 (145 reviews) | 

#### Design

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Drawing** | 9.4 (43 reviews) | Not enough data | Not enough data | 8.7 (150 reviews) | 

### PCB Design

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 8.2/10 | 15 |
| **Mastercam** | N/A | N/A |
| **Inventor** | N/A | N/A |
| **Onshape** | N/A | N/A |

#### Design

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **PCB layout editing** | 7.9 (12 reviews) | Not enough data | Not enough data | Not enough data | 
| **Schematic editor** | 7.8 (12 reviews) | Not enough data | Not enough data | Not enough data | 

#### Tools

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **3D modeling tools** | 9.2 (13 reviews) | Not enough data | Not enough data | Not enough data | 
| **Component placement** | 8.7 (13 reviews) | Not enough data | Not enough data | Not enough data | 

#### Library

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Component libraries** | 8.2 (13 reviews) | Not enough data | Not enough data | Not enough data | 

#### Platform

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Board size** | 8.6 (13 reviews) | Not enough data | Not enough data | Not enough data | 
| **Layers** | 8.1 (12 reviews) | Not enough data | Not enough data | Not enough data | 

#### Customization

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Custom commands** | 7.8 (12 reviews) | Not enough data | Not enough data | Not enough data | 
| **Custom interface** | 8.3 (12 reviews) | Not enough data | Not enough data | Not enough data | 

### Simulation & CAE

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 8.2/10 | 64 |
| **Mastercam** | N/A | N/A |
| **Inventor** | 7.5/10 | 20 |
| **Onshape** | 6.8/10 | 23 |

#### Design

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **3D/solid modeling Tools** | 9.2 (62 reviews) | Not enough data | 9.0 (20 reviews) | 9.0 (22 reviews) | 
| **Drawing Tools** | 9.0 (62 reviews) | Not enough data | 8.6 (20 reviews) | 8.7 (23 reviews) | 
| **Editing Tools** | 8.8 (62 reviews) | Not enough data | 8.7 (20 reviews) | 8.6 (23 reviews) | 
| **Rendering tools** | 7.7 (60 reviews) | Not enough data | 7.6 (19 reviews) | 7.7 (22 reviews) | 

#### Tools

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Fluid analysis** | 8.0 (54 reviews) | Not enough data | 5.6 (16 reviews) | 3.7 (22 reviews) | 
| **Finite element analysis** | 7.9 (56 reviews) | Not enough data | 7.5 (19 reviews) | 5.8 (22 reviews) | 
| **Multibody dynamics** | 7.4 (49 reviews) | Not enough data | 7.1 (17 reviews) | 5.6 (20 reviews) | 

#### Work

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Discrete event modeling** | 7.6 (41 reviews) | Not enough data | 6.9 (15 reviews) | 5.3 (20 reviews) | 
| **Continuous event modeling** | 7.8 (42 reviews) | Not enough data | 6.8 (15 reviews) | 4.4 (20 reviews) | 
| **Mechanical event simulation** | 8.3 (51 reviews) | Not enough data | 7.2 (16 reviews) | 6.0 (19 reviews) | 
| **Manufacturing process simulation** | 8.1 (44 reviews) | Not enough data | 7.6 (14 reviews) | 4.8 (20 reviews) | 
| **Integrate** | 8.4 (47 reviews) | Not enough data | 7.6 (16 reviews) | 6.8 (19 reviews) | 

#### Environment

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Hardware support** | 8.3 (53 reviews) | Not enough data | 7.7 (17 reviews) | 8.0 (18 reviews) | 
| **Task** | 8.4 (51 reviews) | Not enough data | 7.7 (18 reviews) | 8.1 (17 reviews) | 
| **Manage Multiple Profiles** | 8.2 (49 reviews) | Not enough data | 6.9 (18 reviews) | 8.3 (17 reviews) | 
| **Command Clarity** | 8.6 (53 reviews) | Not enough data | 8.1 (19 reviews) | 8.4 (18 reviews) | 

### Product Lifecycle Management (PLM)

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | N/A | N/A |
| **Mastercam** | N/A | N/A |
| **Inventor** | N/A | N/A |
| **Onshape** | 7.7/10 | 17 |

#### New Product Introduction

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Ideation** | Not enough data | Not enough data | Not enough data | 8.0 (17 reviews) | 
| **Time-to-market** | Not enough data | Not enough data | Not enough data | 8.0 (17 reviews) | 
| **Cost estimating** | Not enough data | Not enough data | Not enough data | 6.9 (16 reviews) | 
| **Product approval** | Not enough data | Not enough data | Not enough data | 8.2 (15 reviews) | 

#### CAD

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **CAD Models** | Not enough data | Not enough data | Not enough data | 9.3 (17 reviews) | 
| **CAD Options** | Not enough data | Not enough data | Not enough data | 8.0 (17 reviews) | 
| **Conversion** | Not enough data | Not enough data | Not enough data | 8.3 (16 reviews) | 

#### Collaboration

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Supplier alignment** | Not enough data | Not enough data | Not enough data | 7.9 (17 reviews) | 
| **Communication** | Not enough data | Not enough data | Not enough data | 8.3 (17 reviews) | 
| **Development** | Not enough data | Not enough data | Not enough data | 8.5 (17 reviews) | 
| **Document Management** | Not enough data | Not enough data | Not enough data | 8.5 (17 reviews) | 

#### Product Data Management

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Product Metadata** | Not enough data | Not enough data | Not enough data | Feature Not Available | 
| **Data Quality** | Not enough data | Not enough data | Not enough data | 8.2 (15 reviews) | 
| **Version Control** | Not enough data | Not enough data | Not enough data | 8.5 (16 reviews) | 

#### Bill of Materials

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **BOM management** | Not enough data | Not enough data | Not enough data | 8.8 (16 reviews) | 
| **Multi-level BOM** | Not enough data | Not enough data | Not enough data | 8.8 (15 reviews) | 
| **BOM Types** | Not enough data | Not enough data | Not enough data | 8.5 (14 reviews) | 
| **BOM visualization** | Not enough data | Not enough data | Not enough data | 8.1 (15 reviews) | 

#### Engineering Change Management

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **ECR Workflows** | Not enough data | Not enough data | Not enough data | 8.5 (14 reviews) | 
| **Change Management** | Not enough data | Not enough data | Not enough data | 8.5 (16 reviews) | 
| **ECO Management** | Not enough data | Not enough data | Not enough data | 8.0 (14 reviews) | 

#### Simulation

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Virtual Testing** | Not enough data | Not enough data | Not enough data | 6.3 (14 reviews) | 
| **Analysis** | Not enough data | Not enough data | Not enough data | 6.4 (13 reviews) | 
| **Optimization** | Not enough data | Not enough data | Not enough data | 6.8 (14 reviews) | 

#### Analytics

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Reporting** | Not enough data | Not enough data | Not enough data | 7.0 (14 reviews) | 
| **Costing** | Not enough data | Not enough data | Not enough data | Feature Not Available | 
| **Product Intelligence** | Not enough data | Not enough data | Not enough data | 7.1 (14 reviews) | 

#### Quality management

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Quality planning** | Not enough data | Not enough data | Not enough data | 6.8 (13 reviews) | 
| **Traceability** | Not enough data | Not enough data | Not enough data | 6.7 (13 reviews) | 
| **Compliance** | Not enough data | Not enough data | Not enough data | 6.9 (13 reviews) | 

#### Integration

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **ERP** | Not enough data | Not enough data | Not enough data | 6.9 (13 reviews) | 
| **MES** | Not enough data | Not enough data | Not enough data | 6.1 (12 reviews) | 
| **PIM** | Not enough data | Not enough data | Not enough data | 6.7 (11 reviews) | 
| **Maintenance** | Not enough data | Not enough data | Not enough data | 7.4 (12 reviews) | 

#### Generative AI

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **AI Text Summarization** | Not enough data | Not enough data | Not enough data | Feature Not Available | 
| **AI Image-to-Text** | Not enough data | Not enough data | Not enough data | Feature Not Available | 

### Mechanical Computer-aided Design (MCAD)

| Product | Score | Reviews |
|---|---|---|
| **SOLIDWORKS** | 8.4/10 | 45 |
| **Mastercam** | N/A | N/A |
| **Inventor** | 9.0/10 | 6 |
| **Onshape** | 8.5/10 | 39 |

#### Tools - Mechanical Computer-aided Design (MCAD)

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **3D/solid modeling Tools** | 9.4 (36 reviews) | Not enough data | 9.0 (5 reviews) | 8.9 (38 reviews) | 
| **Rendering Tools** | 8.7 (28 reviews) | Not enough data | Not enough data | 7.5 (35 reviews) | 
| **Drawing Tools** | 9.2 (30 reviews) | Not enough data | 9.3 (5 reviews) | 8.2 (36 reviews) | 
| **Editing Tools** | 9.1 (26 reviews) | Not enough data | Not enough data | 8.9 (36 reviews) | 
| **Text Editing Tools** | 7.7 (25 reviews) | Not enough data | Not enough data | 7.1 (36 reviews) | 

#### File Options - Mechanical Computer-aided Design (MCAD)

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Export Files** | 8.6 (31 reviews) | Not enough data | Not enough data | 9.1 (36 reviews) | 
| **Import Files** | 8.6 (27 reviews) | Not enough data | Not enough data | 8.6 (36 reviews) | 
| **File Interoperability** | 8.3 (29 reviews) | Not enough data | 9.3 (5 reviews) | 8.6 (36 reviews) | 
| **Backwards compatibility** | 8.0 (26 reviews) | Not enough data | Not enough data | 8.9 (35 reviews) | 
| **File size** | 7.3 (32 reviews) | Not enough data | 8.3 (5 reviews) | 8.7 (37 reviews) | 

#### Customization - Mechanical Computer-aided Design (MCAD)

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Custom Commands** | 8.4 (23 reviews) | Not enough data | Not enough data | 8.6 (35 reviews) | 
| **Custom Scripts** | 8.4 (24 reviews) | Not enough data | Not enough data | 8.6 (34 reviews) | 
| **Custom Menus** | 7.6 (24 reviews) | Not enough data | Not enough data | 8.1 (36 reviews) | 
| **Custom Interface** | 8.2 (24 reviews) | Not enough data | Not enough data | 8.2 (33 reviews) | 

#### Environment - Mechanical Computer-aided Design (MCAD)

| Feature | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Hardware support** | 8.0 (27 reviews) | Not enough data | Not enough data | 8.9 (34 reviews) | 
| **Task-based interfaces** | 8.4 (23 reviews) | Not enough data | Not enough data | 8.5 (31 reviews) | 
| **Manage Multiple Profiles** | 7.9 (23 reviews) | Not enough data | Not enough data | 8.6 (32 reviews) | 
| **Command Clarity** | 9.0 (27 reviews) | Not enough data | Not enough data | 9.1 (33 reviews) | 

---
## Categories

**Unique to SOLIDWORKS (10):** [Mechanical Computer-aided Design (MCAD) Software](https://www.g2.com/categories/mechanical-computer-aided-design-mcad), [General-Purpose CAD Software](https://www.g2.com/categories/general-purpose-cad), [Simulation & CAE Software](https://www.g2.com/categories/simulation-cae), [CAD Viewers](https://www.g2.com/categories/cad-viewers), [Sketching Software](https://www.g2.com/categories/sketching), [PCB Design Software](https://www.g2.com/categories/pcb-design), [Computer-Aided Manufacturing (CAM) Software](https://www.g2.com/categories/computer-aided-manufacturing-cam), [CAD Libraries](https://www.g2.com/categories/cad-libraries), [CAD Data Exchange Software](https://www.g2.com/categories/cad-data-exchange), [Additive Manufacturing Software](https://www.g2.com/categories/additive-manufacturing)

**Unique to Mastercam (1):** [Computer-Aided Manufacturing (CAM) Software](https://www.g2.com/categories/computer-aided-manufacturing-cam)

**Unique to Inventor (3):** [Mechanical Computer-aided Design (MCAD) Software](https://www.g2.com/categories/mechanical-computer-aided-design-mcad), [Simulation & CAE Software](https://www.g2.com/categories/simulation-cae), [General-Purpose CAD Software](https://www.g2.com/categories/general-purpose-cad)

**Unique to Onshape (9):** [Mechanical Computer-aided Design (MCAD) Software](https://www.g2.com/categories/mechanical-computer-aided-design-mcad), [Product Data Management (PDM) Software](https://www.g2.com/categories/product-data-management-pdm), [CAD Viewers](https://www.g2.com/categories/cad-viewers), [General-Purpose CAD Software](https://www.g2.com/categories/general-purpose-cad), [Product Lifecycle Management (PLM) Software](https://www.g2.com/categories/product-lifecycle-management-plm), [Simulation & CAE Software](https://www.g2.com/categories/simulation-cae), [Sketching Software](https://www.g2.com/categories/sketching), [PCB Design Software](https://www.g2.com/categories/pcb-design), [Additive Manufacturing Software](https://www.g2.com/categories/additive-manufacturing)


---
## Reviewer Demographics

### By Company Size

| Segment | SOLIDWORKS | Mastercam | Inventor | Onshape | 
|---|---|---|---|---|
| **Small-Business** | 44.3% | 33.3% | 35.0% | 79.0% | 
| **Mid-Market** | 33.8% | 50.0% | 42.7% | 16.7% | 
| **Enterprise** | 21.9% | 16.7% | 22.3% | 4.3% | 

### By Industry

#### SOLIDWORKS

- **Mechanical or Industrial Engineering:** 23.2%
- **Design:** 11.7%
- **Automotive:** 6.6%
- **Electrical/Electronic Manufacturing:** 5.9%
- **Medical Devices:** 5.8%
- **Machinery:** 5.6%
- **Higher Education:** 4.6%
- **Aviation & Aerospace:** 4.5%
- **Oil & Energy:** 3.0%
- **Consumer Goods:** 2.2%
- **Other:** 26.8%

#### Mastercam

- **Mechanical or Industrial Engineering:** 16.7%
- **Machinery:** 16.7%
- **Education Management:** 12.5%
- **Research:** 8.3%
- **Semiconductors:** 4.2%
- **Nanotechnology:** 4.2%
- **Mining & Metals:** 4.2%
- **Medical Devices:** 4.2%
- **Information Technology and Services:** 4.2%
- **Furniture:** 4.2%
- **Other:** 20.8%

#### Inventor

- **Mechanical or Industrial Engineering:** 24.9%
- **Machinery:** 7.8%
- **Design:** 7.1%
- **Construction:** 5.0%
- **Oil & Energy:** 3.8%
- **Utilities:** 3.8%
- **Automotive:** 2.6%
- **Electrical/Electronic Manufacturing:** 2.6%
- **Industrial Automation:** 2.4%
- **Education Management:** 2.4%
- **Other:** 37.7%

#### Onshape

- **Mechanical or Industrial Engineering:** 19.7%
- **Design:** 10.1%
- **Medical Devices:** 6.5%
- **Machinery:** 6.2%
- **Industrial Automation:** 5.7%
- **Consumer Goods:** 4.8%
- **Consumer Electronics:** 4.6%
- **Automotive:** 3.8%
- **Electrical/Electronic Manufacturing:** 3.5%
- **Manufacturing:** 2.9%
- **Other:** 32.2%

---
## Alternatives

### Alternatives to SOLIDWORKS

- [Autodesk Fusion](https://www.g2.com/products/autodesk-fusion/reviews) — 4.5/5 stars (519 reviews)
- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (599 reviews)
- [Creo](https://www.g2.com/products/creo-2025-08-26/reviews) — 4.1/5 stars (200 reviews)
- [AutoCAD](https://www.g2.com/products/autocad/reviews) — 4.4/5 stars (1934 reviews)
- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1324 reviews)
- [Designcenter NX](https://www.g2.com/products/designcenter-nx/reviews) — 4.4/5 stars (527 reviews)
- [IronCAD](https://www.g2.com/products/ironcad/reviews) — 4.4/5 stars (43 reviews)
- [CATIA](https://www.g2.com/products/catia/reviews) — 4.2/5 stars (255 reviews)
- [MATLAB](https://www.g2.com/products/matlab/reviews) — 4.5/5 stars (770 reviews)
- [MicroStation](https://www.g2.com/products/microstation/reviews) — 4.0/5 stars (413 reviews)

### Alternatives to Mastercam

- [Autodesk Fusion](https://www.g2.com/products/autodesk-fusion/reviews) — 4.5/5 stars (519 reviews)
- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (599 reviews)
- [NX CAM](https://www.g2.com/products/nx-cam/reviews) — 4.4/5 stars (297 reviews)
- [SolidCAM](https://www.g2.com/products/solidcam/reviews) — 4.3/5 stars (38 reviews)
- [SolidWorks CAM](https://www.g2.com/products/solidworks-cam/reviews) — 4.3/5 stars (34 reviews)
- [GibbsCAM](https://www.g2.com/products/gibbscam/reviews) — 4.3/5 stars (22 reviews)
- [CAMWorks](https://www.g2.com/products/camworks/reviews) — 4.1/5 stars (18 reviews)
- [HSM](https://www.g2.com/products/hsm/reviews) — 4.3/5 stars (18 reviews)
- [PowerMill](https://www.g2.com/products/powermill/reviews) — 4.2/5 stars (17 reviews)
- [FeatureCAM](https://www.g2.com/products/featurecam/reviews) — 3.8/5 stars (14 reviews)

### Alternatives to Inventor

- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (599 reviews)
- [Creo](https://www.g2.com/products/creo-2025-08-26/reviews) — 4.1/5 stars (200 reviews)
- [IronCAD](https://www.g2.com/products/ironcad/reviews) — 4.4/5 stars (43 reviews)
- [CATIA](https://www.g2.com/products/catia/reviews) — 4.2/5 stars (255 reviews)
- [Rhinoceros](https://www.g2.com/products/rhinoceros/reviews) — 4.4/5 stars (191 reviews)
- [FreeCAD](https://www.g2.com/products/freecad/reviews) — 4.1/5 stars (61 reviews)
- [SolidWorks Simulation](https://www.g2.com/products/solidworks-solidworks-simulation/reviews) — 4.4/5 stars (60 reviews)
- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1324 reviews)
- [Designcenter NX](https://www.g2.com/products/designcenter-nx/reviews) — 4.4/5 stars (527 reviews)
- [ZWCAD](https://www.g2.com/products/zwcad/reviews) — 4.6/5 stars (349 reviews)

### Alternatives to Onshape

- [Autodesk Fusion](https://www.g2.com/products/autodesk-fusion/reviews) — 4.5/5 stars (519 reviews)
- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (599 reviews)
- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1324 reviews)
- [Designcenter NX](https://www.g2.com/products/designcenter-nx/reviews) — 4.4/5 stars (527 reviews)
- [AutoCAD](https://www.g2.com/products/autocad/reviews) — 4.4/5 stars (1934 reviews)
- [Altium Develop](https://www.g2.com/products/altium-develop/reviews) — 4.5/5 stars (997 reviews)
- [CATIA](https://www.g2.com/products/catia/reviews) — 4.2/5 stars (255 reviews)
- [Rhinoceros](https://www.g2.com/products/rhinoceros/reviews) — 4.4/5 stars (191 reviews)
- [FreeCAD](https://www.g2.com/products/freecad/reviews) — 4.1/5 stars (61 reviews)
- [Blender](https://www.g2.com/products/blender/reviews) — 4.6/5 stars (316 reviews)

---
## Top Discussions

### SOLIDWORKS

- Title: [What is SOLIDWORKS used for?](https://www.g2.com/discussions/what-is-solidworks-used-for) — 3 comments, 1 upvote
  > **Top comment:** "A person can use SolidWorks for many things, Part modeling, Assembly Testing, rendering, Creating working animation of any machine or product. Start..."
- Title: [How to stop or cancel a ongoing command.](https://www.g2.com/discussions/how-to-stop-or-cancel-a-ongoing-command) — 2 comments, 1 upvote
  > **Top comment:** "By pressing escape key."
- Title: [best use o this software](https://www.g2.com/discussions/35425-best-use-o-this-software) — 2 comments, 1 upvote
  > **Top comment:** "Making 2D sketches and extruding them to make 3d sketches."
- Title: [Where is the Features toolbar in Solidworks?](https://www.g2.com/discussions/where-is-the-features-toolbar-in-solidworks) — 1 comment
  > **Top comment:** "Right-click in the window border, click Toolbars, and select or clear a toolbar name.
Click Tools > Customize. On the Toolbars tab, select the toolbars to..."
- Title: [What are features in Solidworks?](https://www.g2.com/discussions/what-are-features-in-solidworks) — 1 comment
  > **Top comment:** "Solidworks have so many feature like sketch tool, Part modeling, Assembly modeling, Drawing Tool, Sheet metal, weldments, Surface modeling, Rendering Tool,..."

### Mastercam

No discussions available for this product.

### Inventor

- Title: [What are some of the best practices for students working in groups to use Inventor?](https://www.g2.com/discussions/what-are-some-of-the-best-practices-for-students-working-in-groups-to-use-inventor) — 2 comments, 1 upvote
  > **Top comment:** "Hi, to be honest with you, I would work with a consultant on that. It shouldn't take more than a day for a consultant to help with a report that will answer..."
- Title: [How do you handle the data creation problem?](https://www.g2.com/discussions/how-do-you-handle-the-data-creation-problem) — 2 comments, 1 upvote
  > **Top comment:** "You basically need to create each model from scratch in Inventor. You can copy your AutoCAD in Inventor and extrude the models but the models won't be..."
- Title: [Is integration with other Autodesk products being considered?](https://www.g2.com/discussions/15145-is-integration-with-other-autodesk-products-being-considered) — 2 comments, 1 upvote
  > **Top comment:** "Autodesk published a video on how to export Inventor parts to Revit here: https://www.youtube.com/watch?v=ue7-WtyiUtI"
- Title: [Is there a good place to look for more advanced tutorials/examples for iLogic?](https://www.g2.com/discussions/13895-is-there-a-good-place-to-look-for-more-advanced-tutorials-examples-for-ilogic) — 2 comments, 1 upvote
  > **Top comment:** "I'm not aware of a flat out repository for examples, but there is a fantastic thread on the Inventor forum that showcases a ton of different examples. If you..."
- Title: [there is a form to get more realistic renders from inventor?](https://www.g2.com/discussions/12147-there-is-a-form-to-get-more-realistic-renders-from-inventor) — 2 comments, 1 upvote
  > **Top comment:** "Max can load Inventor files natively, so that's certainly one option.

The render engine in Inventor is pretty good, though. There is a great deal of ..."

### Onshape

- Title: [What is Onshape used for?](https://www.g2.com/discussions/what-is-onshape-used-for) — 1 comment
  > **Top comment:** "Collaboratively design products and solutions for problems using a browser on nearly any computer. Manage the data for the parts you design and prepare them..."
- Title: [When can we expect some better surfacing tools or plugins.](https://www.g2.com/discussions/when-can-we-expect-some-better-surfacing-tools-or-plugins) — 1 comment, 1 upvote
  > **Top comment:** "You should really try some of the custom feature scripts like sculpt, Plane, 3D sketch and surface extend. Also, I'm sure there are more since I looked into it."
- Title: [Does this product have the capability to show stress/strain, show transfer of heat, and airflow?](https://www.g2.com/discussions/42157-does-this-product-have-the-capability-to-show-stress-strain-show-transfer-of-heat-and-airflow) — 1 comment, 1 upvote
  > **Top comment:** "No, only through partner apps"
- Title: [Onshape's 2D drawing platform doesn't let you make a sketch aside from line or spline.](https://www.g2.com/discussions/34202-onshape-s-2d-drawing-platform-doesn-t-let-you-make-a-sketch-aside-from-line-or-spline) — 1 comment, 1 upvote
  > **Top comment:** "It has many basic sketch features"
- Title: [What is the fastest way to deselect multiple items when zoomed into a design?](https://www.g2.com/discussions/33946-what-is-the-fastest-way-to-deselect-multiple-items-when-zoomed-into-a-design) — 1 comment, 1 upvote
  > **Top comment:** "Tapping the Space Bar"

---
**Source:** [G2.com](https://www.g2.com) | [Comparison Page](https://www.g2.com/compare/solidworks-vs-mastercam-vs-inventor-vs-onshape)