# Mastercam, SOLIDWORKS, Archicad vs Vectorworks Architect Comparison

| | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Star Rating** | 4.1 out of 5 | 4.5 out of 5 | 4.6 out of 5 | 4.3 out of 5 | 
| **Total Reviews** | 26 | 643 | 291 | 235 | 
| **Largest Market Segment** | Mid-Market (50.0% of reviews) | Small-Business (44.3% of reviews) | Small-Business (86.7% of reviews) | Small-Business (84.6% of reviews) | 
| **Entry Level Price** | No pricing available | No pricing available | $2,810.00 1 Seat Per Year | $1,530.00 1 license Per Year | 

---
## Top Pros & Cons

### Mastercam

Pros:
- Ease of Use (12 reviews)
- Tooling (6 reviews)

Cons:
- Difficult Learning Curve (11 reviews)
- Feature Limitations (5 reviews)

### SOLIDWORKS

Pros:
- Ease of Use (37 reviews)
- Features (29 reviews)

Cons:
- Performance Issues (17 reviews)
- Slow Performance (15 reviews)

### Archicad

Pros:
- Ease of Use (52 reviews)
- 3D Modeling (35 reviews)

Cons:
- Missing Features (30 reviews)
- Library Issues (16 reviews)

### Vectorworks Architect

Pros:
- Ease of Use (13 reviews)
- Features (12 reviews)

Cons:
- 3D Modeling Issues (4 reviews)
- Difficult Learning (4 reviews)

---
## Ratings Comparison
| Rating | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
  | **Meets Requirements** | 9.1 (21 reviews) | 8.8 (535 reviews) | 8.8 (242 reviews) | 8.5 (213 reviews) | 
  | **Ease of Use** | 8.2 (21 reviews) | 8.6 (540 reviews) | 8.4 (244 reviews) | 8.2 (214 reviews) | 
  | **Ease of Setup** | 6.9 (6 reviews) | 8.3 (112 reviews) | 8.3 (88 reviews) | 8.5 (78 reviews) | 
  | **Ease of Admin** | 7.2 (6 reviews) | 8.0 (47 reviews) | 8.0 (41 reviews) | 8.3 (27 reviews) | 
  | **Quality of Support** | 7.9 (19 reviews) | 8.2 (475 reviews) | 8.2 (230 reviews) | 8.5 (203 reviews) | 
  | **Has the product been a good partner in doing business?** | 8.3 (6 reviews) | 8.3 (47 reviews) | 8.4 (41 reviews) | 8.7 (25 reviews) | 
  | **Product Direction (% positive)** | 8.8 (20 reviews) | 8.6 (529 reviews) | 8.2 (228 reviews) | 7.7 (211 reviews) | 

---
## Pricing

### Mastercam

#### Entry-Level Pricing

No pricing available

#### Free Trial

No information available

### SOLIDWORKS

#### Entry-Level Pricing

No pricing available

#### Free Trial

No information available

### Archicad

#### Entry-Level Pricing

Plan: 3-Year Archicad Collaborate Subscription

Price: $2,810.00 1 Seat Per Year

Description: Three year subscription, billed annually. Prices are informational only. Final price depends on your billing country, and may differ from prices shown here.

Key Features:
- BIMx Pro
- Redshift rendering
- Surface catalog

[Browse all 3 editions](https://www.g2.com/products/archicad/pricing)

#### Free Trial

Yes

### Vectorworks Architect

#### Entry-Level Pricing

Plan: Annual Subscription

Price: $1,530.00 1 license Per Year

Description: Note: All prices listed in USD.

Key Features:
- Best for frequent use
- Unlimited Vectorworks University Courses
- 15% off online training

[Browse all 2 editions](https://www.g2.com/products/vectorworks-architect/pricing)

#### Free Trial

Yes

---
## Features Comparison By Category

### Building Design and Building Information Modeling (BIM)

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | N/A | N/A |
| **Archicad** | 7.6/10 | 150 |
| **Vectorworks Architect** | 7.1/10 | 57 |

#### Design

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Visualizing** | Not enough data | Not enough data | 9.2 (142 reviews) | 8.3 (53 reviews) | 
| **Rendering** | Not enough data | Not enough data | 7.4 (134 reviews) | 7.4 (48 reviews) | 
| **Drawing** | Not enough data | Not enough data | 9.1 (142 reviews) | 8.7 (53 reviews) | 
| **Editing** | Not enough data | Not enough data | 8.8 (139 reviews) | 7.8 (47 reviews) | 
| **Sequence Steps** | Not enough data | Not enough data | 7.5 (117 reviews) | 6.7 (46 reviews) | 
| **Dynamic Updating** | Not enough data | Not enough data | 8.7 (110 reviews) | 7.6 (43 reviews) | 

#### Collaboration

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Multi User** | Not enough data | Not enough data | 8.7 (121 reviews) | 6.2 (48 reviews) | 
| **File Import/Export** | Not enough data | Not enough data | 8.5 (140 reviews) | 7.8 (52 reviews) | 
| **Annotating ** | Not enough data | Not enough data | 8.2 (138 reviews) | 8.1 (49 reviews) | 
| **Document Storage** | Not enough data | Not enough data | 8.4 (136 reviews) | 7.8 (50 reviews) | 

#### Construction

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Fabrication** | Not enough data | Not enough data | 7.3 (103 reviews) | 6.6 (47 reviews) | 
| **Reinforcement Tools** | Not enough data | Not enough data | 6.4 (97 reviews) | 6.4 (43 reviews) | 
| **Clash Detection ** | Not enough data | Not enough data | 7.3 (109 reviews) | 6.0 (44 reviews) | 
| **Grading** | Not enough data | Not enough data | 6.5 (100 reviews) | 6.3 (40 reviews) | 
| **Earthwork** | Not enough data | Not enough data | 6.2 (96 reviews) | 5.9 (39 reviews) | 

#### Generative AI

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **AI Text Generation** | Not enough data | Not enough data | 6.1 (27 reviews) | Feature Not Available | 
| **AI Text Summarization** | Not enough data | Not enough data | 6.0 (27 reviews) | Feature Not Available | 
| **AI Text-to-3D** | Not enough data | Not enough data | 5.9 (27 reviews) | 5.8 (39 reviews) | 

#### Common Data Environment (CDE) - Building Design and Building Information Modeling

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Role-Based Access** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Centralized Data Management** | Not enough data | Not enough data | Not enough data | Not enough data | 

#### Cost Estimation - Building Design and Building Information Modeling

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Lifecycle Cost Tracking** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Quantity Takeoff & Cost Estimation** | Not enough data | Not enough data | Not enough data | Not enough data | 

#### Electrical & Circuit Design - Building Design and Building Information Modeling

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Clash Detection** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Electrical System Modeling** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **MEP Coordination** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Load Calculation & Analysis** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Interoperability with BIM & CAD** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Circuit Design Integration** | Not enough data | Not enough data | Not enough data | Not enough data | 

### Computer-Aided Manufacturing (CAM)

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | 8.6/10 | 20 |
| **SOLIDWORKS** | 8.7/10 | 53 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### CAD to CAM

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **CAD-CAM Import** | 8.8 (20 reviews) | 9.0 (42 reviews) | Not enough data | Not enough data | 
| **CAM Data Exchange** | 8.1 (18 reviews) | 8.8 (42 reviews) | Not enough data | Not enough data | 
| **CAD/CAM Compatibility** | 8.2 (20 reviews) | 8.9 (43 reviews) | Not enough data | Not enough data | 

#### CNC Programming

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **CNC Workflows** | 8.6 (19 reviews) | 8.7 (39 reviews) | Not enough data | Not enough data | 
| **CNC Feature Recognition** | 8.6 (19 reviews) | 8.6 (38 reviews) | Not enough data | Not enough data | 
| **Programming Control** | 8.3 (20 reviews) | 8.4 (37 reviews) | Not enough data | Not enough data | 

#### Machining

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Job Set-up** | 8.7 (19 reviews) | 8.6 (39 reviews) | Not enough data | Not enough data | 
| **Operations** | 8.7 (20 reviews) | 8.7 (39 reviews) | Not enough data | Not enough data | 
| **Tooling and Toolpaths** | 9.1 (20 reviews) | 8.8 (39 reviews) | Not enough data | Not enough data | 

### General-Purpose CAD

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 8.8/10 | 112 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### Design

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Drawing** | Not enough data | 9.5 (107 reviews) | Not enough data | Not enough data | 
| **Modeling** | Not enough data | 9.4 (107 reviews) | Not enough data | Not enough data | 
| **Visualize ** | Not enough data | 9.2 (103 reviews) | Not enough data | Not enough data | 
| **Rendering** | Not enough data | 8.1 (100 reviews) | Not enough data | Not enough data | 

#### Edit

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **File Import ** | Not enough data | 8.5 (98 reviews) | Not enough data | Not enough data | 
| **Push/Pull** | Not enough data | 8.4 (90 reviews) | Not enough data | Not enough data | 
| **Views** | Not enough data | 9.3 (101 reviews) | Not enough data | Not enough data | 
| **Grips ** | Not enough data | 8.3 (85 reviews) | Not enough data | Not enough data | 

#### Collaboration

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Annotate** | Not enough data | 8.6 (94 reviews) | Not enough data | Not enough data | 
| **Documentation ** | Not enough data | 9.0 (96 reviews) | Not enough data | Not enough data | 
| **Data Extract** | Not enough data | 8.4 (90 reviews) | Not enough data | Not enough data | 

### CAD Libraries

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 8.8/10 | 35 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### Library

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Categorize** | Not enough data | 8.9 (29 reviews) | Not enough data | Not enough data | 
| **Search** | Not enough data | 8.6 (28 reviews) | Not enough data | Not enough data | 
| **Deduplication** | Not enough data | 8.4 (28 reviews) | Not enough data | Not enough data | 
| **Feedback** | Not enough data | 8.6 (23 reviews) | Not enough data | Not enough data | 

#### CAD

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Types** | Not enough data | 8.8 (24 reviews) | Not enough data | Not enough data | 
| **Models** | Not enough data | 9.4 (30 reviews) | Not enough data | Not enough data | 
| **Compatibility** | Not enough data | 9.1 (29 reviews) | Not enough data | Not enough data | 

#### Integration

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Catalogs** | Not enough data | 8.5 (26 reviews) | Not enough data | Not enough data | 
| **CAD & PLM** | Not enough data | 9.6 (29 reviews) | Not enough data | Not enough data | 
| **ERP** | Not enough data | 8.6 (25 reviews) | Not enough data | Not enough data | 

### CAD Data Exchange

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 8.8/10 | 34 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### Data

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **3D Format** | Not enough data | 9.3 (29 reviews) | Not enough data | Not enough data | 
| **Data Quality** | Not enough data | 8.8 (27 reviews) | Not enough data | Not enough data | 
| **Extra Information** | Not enough data | 8.3 (26 reviews) | Not enough data | Not enough data | 
| **Standard Format** | Not enough data | 9.0 (27 reviews) | Not enough data | Not enough data | 
| **Translate** | Not enough data | 8.3 (24 reviews) | Not enough data | Not enough data | 
| **Validation** | Not enough data | 8.7 (25 reviews) | Not enough data | Not enough data | 

#### Logistics

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Integrate** | Not enough data | 9.1 (25 reviews) | Not enough data | Not enough data | 

### Additive Manufacturing

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 7.9/10 | 66 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### File Support - Additive Manufacturing

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **STL Compatible** | Not enough data | 8.7 (61 reviews) | Not enough data | Not enough data | 
| **3MF Compatible** | Not enough data | 8.5 (47 reviews) | Not enough data | Not enough data | 
| **OBJ Compatible** | Not enough data | 8.4 (52 reviews) | Not enough data | Not enough data | 

#### File Editing - Additive Manufacturing

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Mesh Repair** | Not enough data | 7.5 (55 reviews) | Not enough data | Not enough data | 
| **File Editing** | Not enough data | 8.6 (60 reviews) | Not enough data | Not enough data | 

#### Software Integrations - Additive Manufacturing

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Standalone Slicer** | Not enough data | 7.6 (49 reviews) | Not enough data | Not enough data | 
| **Inetgrated 3D Modeling** | Not enough data | 8.8 (58 reviews) | Not enough data | Not enough data | 

#### Software Type - Additive Manufacturing

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Cloud-based Platform** | Not enough data | 7.7 (48 reviews) | Not enough data | Not enough data | 
| **Downloadable Application** | Not enough data | 8.6 (53 reviews) | Not enough data | Not enough data | 

#### Generative AI - Additive Manufacturing

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **AI Text-to-Image** | Not enough data | 6.0 (20 reviews) | Not enough data | Not enough data | 
| **AI Text-to-3D** | Not enough data | 6.1 (20 reviews) | Not enough data | Not enough data | 

#### Building Preparation - Additive Manufacturing

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Material Management** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Building Simulation** | Not enough data | Not enough data | Not enough data | Not enough data | 
| **Slicing Optimization** | Not enough data | Not enough data | Not enough data | Not enough data | 

### CAD Viewers

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 9.0/10 | 49 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### File Options

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Import files** | Not enough data | 8.9 (44 reviews) | Not enough data | Not enough data | 
| **Export files** | Not enough data | 9.1 (43 reviews) | Not enough data | Not enough data | 
| **View 2D files** | Not enough data | 9.1 (43 reviews) | Not enough data | Not enough data | 
| **View 3D files** | Not enough data | 9.3 (44 reviews) | Not enough data | Not enough data | 
| **Batch convert files** | Not enough data | 8.3 (35 reviews) | Not enough data | Not enough data | 
| **File size** | Not enough data | 8.3 (41 reviews) | Not enough data | Not enough data | 

#### Tools

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Dimensioning tools** | Not enough data | 9.5 (43 reviews) | Not enough data | Not enough data | 
| **Change units** | Not enough data | 9.1 (41 reviews) | Not enough data | Not enough data | 
| **3D/solid modeling tools** | Not enough data | 9.2 (43 reviews) | Not enough data | Not enough data | 

#### Design

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Drawing** | Not enough data | 9.4 (43 reviews) | Not enough data | Not enough data | 

### PCB Design

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 8.2/10 | 15 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### Design

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **PCB layout editing** | Not enough data | 7.9 (12 reviews) | Not enough data | Not enough data | 
| **Schematic editor** | Not enough data | 7.8 (12 reviews) | Not enough data | Not enough data | 

#### Tools

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **3D modeling tools** | Not enough data | 9.2 (13 reviews) | Not enough data | Not enough data | 
| **Component placement** | Not enough data | 8.7 (13 reviews) | Not enough data | Not enough data | 

#### Library

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Component libraries** | Not enough data | 8.2 (13 reviews) | Not enough data | Not enough data | 

#### Platform

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Board size** | Not enough data | 8.6 (13 reviews) | Not enough data | Not enough data | 
| **Layers** | Not enough data | 8.1 (12 reviews) | Not enough data | Not enough data | 

#### Customization

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Custom commands** | Not enough data | 7.8 (12 reviews) | Not enough data | Not enough data | 
| **Custom interface** | Not enough data | 8.3 (12 reviews) | Not enough data | Not enough data | 

### Simulation & CAE

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 8.2/10 | 64 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### Design

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **3D/solid modeling Tools** | Not enough data | 9.2 (62 reviews) | Not enough data | Not enough data | 
| **Drawing Tools** | Not enough data | 9.0 (62 reviews) | Not enough data | Not enough data | 
| **Editing Tools** | Not enough data | 8.8 (62 reviews) | Not enough data | Not enough data | 
| **Rendering tools** | Not enough data | 7.7 (60 reviews) | Not enough data | Not enough data | 

#### Tools

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Fluid analysis** | Not enough data | 8.0 (54 reviews) | Not enough data | Not enough data | 
| **Finite element analysis** | Not enough data | 7.9 (56 reviews) | Not enough data | Not enough data | 
| **Multibody dynamics** | Not enough data | 7.4 (49 reviews) | Not enough data | Not enough data | 

#### Work

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Discrete event modeling** | Not enough data | 7.6 (41 reviews) | Not enough data | Not enough data | 
| **Continuous event modeling** | Not enough data | 7.8 (42 reviews) | Not enough data | Not enough data | 
| **Mechanical event simulation** | Not enough data | 8.3 (51 reviews) | Not enough data | Not enough data | 
| **Manufacturing process simulation** | Not enough data | 8.1 (44 reviews) | Not enough data | Not enough data | 
| **Integrate** | Not enough data | 8.4 (47 reviews) | Not enough data | Not enough data | 

#### Environment

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Hardware support** | Not enough data | 8.3 (53 reviews) | Not enough data | Not enough data | 
| **Task** | Not enough data | 8.4 (51 reviews) | Not enough data | Not enough data | 
| **Manage Multiple Profiles** | Not enough data | 8.2 (49 reviews) | Not enough data | Not enough data | 
| **Command Clarity** | Not enough data | 8.6 (53 reviews) | Not enough data | Not enough data | 

### Urban Planning and Design

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | N/A | N/A |
| **Archicad** | 7.8/10 | 27 |
| **Vectorworks Architect** | N/A | N/A |

#### Plan

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Documentation** | Not enough data | Not enough data | 8.4 (27 reviews) | Not enough data | 
| **Sequence** | Not enough data | Not enough data | 7.4 (25 reviews) | Not enough data | 
| **Annotate** | Not enough data | Not enough data | 8.3 (27 reviews) | Not enough data | 
| **Collaborate** | Not enough data | Not enough data | 8.6 (27 reviews) | Not enough data | 

#### Design

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **3D Modeling** | Not enough data | Not enough data | 9.2 (27 reviews) | Not enough data | 
| **3D Rendering** | Not enough data | Not enough data | 7.6 (27 reviews) | Not enough data | 
| **2D Modeling** | Not enough data | Not enough data | 8.6 (27 reviews) | Not enough data | 
| **Editing** | Not enough data | Not enough data | 8.8 (27 reviews) | Not enough data | 

#### Analysis

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Sustainability** | Not enough data | Not enough data | 7.0 (25 reviews) | Not enough data | 
| **Liveability** | Not enough data | Not enough data | 5.9 (23 reviews) | Not enough data | 
| **Movement** | Not enough data | Not enough data | 6.4 (23 reviews) | Not enough data | 

### Architectural Rendering

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | N/A | N/A |
| **Archicad** | 7.7/10 | 133 |
| **Vectorworks Architect** | 7.2/10 | 29 |

#### Library

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Objects** | Not enough data | Not enough data | 7.6 (130 reviews) | 7.4 (29 reviews) | 
| **Materials** | Not enough data | Not enough data | 7.6 (130 reviews) | 7.6 (29 reviews) | 

#### Rendering

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Textures** | Not enough data | Not enough data | 7.2 (128 reviews) | 7.8 (29 reviews) | 
| **Shading** | Not enough data | Not enough data | 7.8 (127 reviews) | 7.6 (29 reviews) | 
| **Lighting** | Not enough data | Not enough data | 7.1 (120 reviews) | 7.4 (29 reviews) | 
| **Exterior Rendering** | Not enough data | Not enough data | 7.0 (123 reviews) | 7.2 (29 reviews) | 
| **Aerial Rendering** | Not enough data | Not enough data | 7.0 (117 reviews) | 6.8 (29 reviews) | 
| **Atmospheric rendering** | Not enough data | Not enough data | 6.1 (108 reviews) | 6.1 (29 reviews) | 

#### Integrations

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **BIM Integration** | Not enough data | Not enough data | 8.5 (122 reviews) | 7.4 (29 reviews) | 
| **3D Rendering Integration** | Not enough data | Not enough data | 8.1 (125 reviews) | 7.5 (28 reviews) | 

#### Generative AI

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **AI Text-to-3D** | Not enough data | Not enough data | 6.4 (37 reviews) | 6.2 (27 reviews) | 

### Mechanical Computer-aided Design (MCAD)

| Product | Score | Reviews |
|---|---|---|
| **Mastercam** | N/A | N/A |
| **SOLIDWORKS** | 8.4/10 | 45 |
| **Archicad** | N/A | N/A |
| **Vectorworks Architect** | N/A | N/A |

#### Tools - Mechanical Computer-aided Design (MCAD)

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **3D/solid modeling Tools** | Not enough data | 9.4 (36 reviews) | Not enough data | Not enough data | 
| **Rendering Tools** | Not enough data | 8.7 (28 reviews) | Not enough data | Not enough data | 
| **Drawing Tools** | Not enough data | 9.2 (30 reviews) | Not enough data | Not enough data | 
| **Editing Tools** | Not enough data | 9.1 (26 reviews) | Not enough data | Not enough data | 
| **Text Editing Tools** | Not enough data | 7.7 (25 reviews) | Not enough data | Not enough data | 

#### File Options - Mechanical Computer-aided Design (MCAD)

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Export Files** | Not enough data | 8.6 (31 reviews) | Not enough data | Not enough data | 
| **Import Files** | Not enough data | 8.6 (27 reviews) | Not enough data | Not enough data | 
| **File Interoperability** | Not enough data | 8.3 (29 reviews) | Not enough data | Not enough data | 
| **Backwards compatibility** | Not enough data | 8.0 (26 reviews) | Not enough data | Not enough data | 
| **File size** | Not enough data | 7.3 (32 reviews) | Not enough data | Not enough data | 

#### Customization - Mechanical Computer-aided Design (MCAD)

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Custom Commands** | Not enough data | 8.4 (23 reviews) | Not enough data | Not enough data | 
| **Custom Scripts** | Not enough data | 8.4 (24 reviews) | Not enough data | Not enough data | 
| **Custom Menus** | Not enough data | 7.6 (24 reviews) | Not enough data | Not enough data | 
| **Custom Interface** | Not enough data | 8.2 (24 reviews) | Not enough data | Not enough data | 

#### Environment - Mechanical Computer-aided Design (MCAD)

| Feature | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Hardware support** | Not enough data | 8.0 (27 reviews) | Not enough data | Not enough data | 
| **Task-based interfaces** | Not enough data | 8.4 (23 reviews) | Not enough data | Not enough data | 
| **Manage Multiple Profiles** | Not enough data | 7.9 (23 reviews) | Not enough data | Not enough data | 
| **Command Clarity** | Not enough data | 9.0 (27 reviews) | Not enough data | Not enough data | 

---
## Categories

**Unique to Mastercam (1):** [Computer-Aided Manufacturing (CAM) Software](https://www.g2.com/categories/computer-aided-manufacturing-cam)

**Unique to SOLIDWORKS (10):** [Mechanical Computer-aided Design (MCAD) Software](https://www.g2.com/categories/mechanical-computer-aided-design-mcad), [General-Purpose CAD Software](https://www.g2.com/categories/general-purpose-cad), [Simulation & CAE Software](https://www.g2.com/categories/simulation-cae), [CAD Viewers](https://www.g2.com/categories/cad-viewers), [Sketching Software](https://www.g2.com/categories/sketching), [PCB Design Software](https://www.g2.com/categories/pcb-design), [Computer-Aided Manufacturing (CAM) Software](https://www.g2.com/categories/computer-aided-manufacturing-cam), [CAD Libraries](https://www.g2.com/categories/cad-libraries), [CAD Data Exchange Software](https://www.g2.com/categories/cad-data-exchange), [Additive Manufacturing Software](https://www.g2.com/categories/additive-manufacturing)

**Unique to Archicad (3):** [Architectural Rendering Software](https://www.g2.com/categories/architectural-rendering), [Building Design and Building Information Modeling (BIM) Software](https://www.g2.com/categories/building-design-and-building-information-modeling-bim), [Urban Planning and Design Software](https://www.g2.com/categories/urban-planning-and-design)

**Unique to Vectorworks Architect (2):** [Building Design and Building Information Modeling (BIM) Software](https://www.g2.com/categories/building-design-and-building-information-modeling-bim), [Architectural Rendering Software](https://www.g2.com/categories/architectural-rendering)


---
## Reviewer Demographics

### By Company Size

| Segment | Mastercam | SOLIDWORKS | Archicad | Vectorworks Architect | 
|---|---|---|---|---|
| **Small-Business** | 33.3% | 44.3% | 86.7% | 84.6% | 
| **Mid-Market** | 50.0% | 33.8% | 10.4% | 9.3% | 
| **Enterprise** | 16.7% | 21.9% | 2.9% | 6.2% | 

### By Industry

#### Mastercam

- **Mechanical or Industrial Engineering:** 16.7%
- **Machinery:** 16.7%
- **Education Management:** 12.5%
- **Research:** 8.3%
- **Semiconductors:** 4.2%
- **Nanotechnology:** 4.2%
- **Mining & Metals:** 4.2%
- **Medical Devices:** 4.2%
- **Information Technology and Services:** 4.2%
- **Furniture:** 4.2%
- **Other:** 20.8%

#### SOLIDWORKS

- **Mechanical or Industrial Engineering:** 23.2%
- **Design:** 11.7%
- **Automotive:** 6.6%
- **Electrical/Electronic Manufacturing:** 5.9%
- **Medical Devices:** 5.8%
- **Machinery:** 5.6%
- **Higher Education:** 4.6%
- **Aviation & Aerospace:** 4.5%
- **Oil & Energy:** 3.0%
- **Consumer Goods:** 2.2%
- **Other:** 26.8%

#### Archicad

- **Architecture & Planning:** 83.0%
- **Construction:** 5.3%
- **Design:** 4.3%
- **Civil Engineering:** 1.4%
- **Marketing and Advertising:** 0.7%
- **Information Technology and Services:** 0.7%
- **Alternative Dispute Resolution:** 0.4%
- **Building Materials:** 0.4%
- **Commercial Real Estate:** 0.4%
- **Computer Software:** 0.4%
- **Other:** 3.2%

#### Vectorworks Architect

- **Architecture & Planning:** 62.3%
- **Design:** 9.2%
- **Entertainment:** 5.7%
- **Construction:** 3.9%
- **Marketing and Advertising:** 2.2%
- **Higher Education:** 2.2%
- **Events Services:** 1.8%
- **Broadcast Media:** 1.3%
- **Performing Arts:** 1.3%
- **Computer Software:** 0.9%
- **Other:** 9.2%

---
## Alternatives

### Alternatives to Mastercam

- [Autodesk Fusion](https://www.g2.com/products/autodesk-fusion/reviews) — 4.5/5 stars (519 reviews)
- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (599 reviews)
- [NX CAM](https://www.g2.com/products/nx-cam/reviews) — 4.4/5 stars (294 reviews)
- [SolidCAM](https://www.g2.com/products/solidcam/reviews) — 4.3/5 stars (38 reviews)
- [SolidWorks CAM](https://www.g2.com/products/solidworks-cam/reviews) — 4.3/5 stars (34 reviews)
- [GibbsCAM](https://www.g2.com/products/gibbscam/reviews) — 4.3/5 stars (22 reviews)
- [HSM](https://www.g2.com/products/hsm/reviews) — 4.3/5 stars (18 reviews)
- [CAMWorks](https://www.g2.com/products/camworks/reviews) — 4.1/5 stars (18 reviews)
- [PowerMill](https://www.g2.com/products/powermill/reviews) — 4.2/5 stars (17 reviews)
- [FeatureCAM](https://www.g2.com/products/featurecam/reviews) — 3.8/5 stars (14 reviews)

### Alternatives to SOLIDWORKS

- [Autodesk Fusion](https://www.g2.com/products/autodesk-fusion/reviews) — 4.5/5 stars (519 reviews)
- [Onshape](https://www.g2.com/products/onshape/reviews) — 4.7/5 stars (695 reviews)
- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (599 reviews)
- [Inventor](https://www.g2.com/products/inventor/reviews) — 4.4/5 stars (440 reviews)
- [Creo](https://www.g2.com/products/creo-2025-08-26/reviews) — 4.1/5 stars (200 reviews)
- [AutoCAD](https://www.g2.com/products/autocad/reviews) — 4.4/5 stars (1930 reviews)
- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1324 reviews)
- [Designcenter NX](https://www.g2.com/products/designcenter-nx/reviews) — 4.4/5 stars (527 reviews)
- [IronCAD](https://www.g2.com/products/ironcad/reviews) — 4.4/5 stars (43 reviews)
- [CATIA](https://www.g2.com/products/catia/reviews) — 4.2/5 stars (255 reviews)

### Alternatives to Archicad

- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1324 reviews)
- [Revit](https://www.g2.com/products/revit/reviews) — 4.6/5 stars (946 reviews)
- [AutoCAD](https://www.g2.com/products/autocad/reviews) — 4.4/5 stars (1930 reviews)
- [Blender](https://www.g2.com/products/blender/reviews) — 4.6/5 stars (315 reviews)
- [Civil 3D](https://www.g2.com/products/civil-3d/reviews) — 4.4/5 stars (304 reviews)
- [V-Ray](https://www.g2.com/products/v-ray/reviews) — 4.5/5 stars (220 reviews)
- [Lumion Pro](https://www.g2.com/products/lumion-pro/reviews) — 4.5/5 stars (108 reviews)
- [AutoCAD MEP](https://www.g2.com/products/autocad-mep/reviews) — 4.3/5 stars (203 reviews)
- [Navisworks](https://www.g2.com/products/navisworks/reviews) — 4.5/5 stars (204 reviews)
- [DataCAD](https://www.g2.com/products/datacad/reviews) — 4.8/5 stars (64 reviews)

### Alternatives to Vectorworks Architect

- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1324 reviews)
- [Revit](https://www.g2.com/products/revit/reviews) — 4.6/5 stars (946 reviews)
- [AutoCAD](https://www.g2.com/products/autocad/reviews) — 4.4/5 stars (1930 reviews)
- [AutoCAD MEP](https://www.g2.com/products/autocad-mep/reviews) — 4.3/5 stars (203 reviews)
- [V-Ray](https://www.g2.com/products/v-ray/reviews) — 4.5/5 stars (220 reviews)
- [DataCAD](https://www.g2.com/products/datacad/reviews) — 4.8/5 stars (64 reviews)
- [ALLPLAN](https://www.g2.com/products/allplan/reviews) — 4.4/5 stars (25 reviews)
- [Civil 3D](https://www.g2.com/products/civil-3d/reviews) — 4.4/5 stars (304 reviews)
- [Blender](https://www.g2.com/products/blender/reviews) — 4.6/5 stars (315 reviews)
- [Enscape 3D](https://www.g2.com/products/enscape-3d/reviews) — 4.6/5 stars (415 reviews)

---
## Top Discussions

### Mastercam

No discussions available for this product.

### SOLIDWORKS

- Title: [What is SOLIDWORKS used for?](https://www.g2.com/discussions/what-is-solidworks-used-for) — 3 comments, 1 upvote
  > **Top comment:** "A person can use SolidWorks for many things, Part modeling, Assembly Testing, rendering, Creating working animation of any machine or product. Start..."
- Title: [How to stop or cancel a ongoing command.](https://www.g2.com/discussions/how-to-stop-or-cancel-a-ongoing-command) — 2 comments, 1 upvote
  > **Top comment:** "By pressing escape key."
- Title: [best use o this software](https://www.g2.com/discussions/35425-best-use-o-this-software) — 2 comments, 1 upvote
  > **Top comment:** "Making 2D sketches and extruding them to make 3d sketches."
- Title: [Where is the Features toolbar in Solidworks?](https://www.g2.com/discussions/where-is-the-features-toolbar-in-solidworks) — 1 comment
  > **Top comment:** "Right-click in the window border, click Toolbars, and select or clear a toolbar name.
Click Tools > Customize. On the Toolbars tab, select the toolbars to..."
- Title: [What are features in Solidworks?](https://www.g2.com/discussions/what-are-features-in-solidworks) — 1 comment
  > **Top comment:** "Solidworks have so many feature like sketch tool, Part modeling, Assembly modeling, Drawing Tool, Sheet metal, weldments, Surface modeling, Rendering Tool,..."

### Archicad

- Title: [Is it necessary to make a new version release every year ?](https://www.g2.com/discussions/is-it-necessary-to-make-a-new-version-release-every-year) — 2 comments, 1 upvote
  > **Top comment:** "No, you can get away with getting it every couple of years. But they do have a good offer when paying yearly and guarantee a new version every year."
- Title: [How best can the newly integrated classifications and properties be used to organize keynotes?](https://www.g2.com/discussions/50662-how-best-can-the-newly-integrated-classifications-and-properties-be-used-to-organize-keynotes) — 2 comments, 1 upvote
  > **Top comment:** "Hi Spencer, 
It is frustrating that there is not a straight forward tool for keynoting, however, it is possible.  Our company uses the "Keynote..."
- Title: [What is the best way to stop it from overloading my computer?](https://www.g2.com/discussions/what-is-the-best-way-to-stop-it-from-overloading-my-computer) — 2 comments, 1 upvote
  > **Top comment:** "Ensure your computer meets the recommended specifications that Graphisoft have published on their website, and otherwise rationalize the way you structure a..."
- Title: [Why doesn't Archicad do 3D renderings?](https://www.g2.com/discussions/pourquoi-archicad-ne-fait-pas-des-rendus-3d) — 2 comments, 1 upvote
  > **Top comment:** "Archicad does 3d Rendering throughout Cinema Render, a rendering motor that comes within the software installation. "
- Title: [How do other people make custom objects for their projects?](https://www.g2.com/discussions/12321-how-do-other-people-make-custom-objects-for-their-projects) — 2 comments, 1 upvote
  > **Top comment:** "you can model your own objects with native Arhicad elements such as Walls, Slabs or any other, and then save them as objects by selecting the entire elements..."

### Vectorworks Architect

No discussions available for this product.

---
**Source:** [G2.com](https://www.g2.com) | [Comparison Page](https://www.g2.com/compare/mastercam-vs-solidworks-vs-archicad-vs-vectorworks-architect)