# Creo vs Inventor Comparison

---
## Frequently Asked Questions

### What is the difference between Inventor vs Creo?

Inventor stands out for its higher G2 rating and ease of use, while Creo is favored for handling complex assemblies and advanced parametric modeling.

| [Inventor](https://www.g2.com/products/inventor/reviews) | [Creo](https://www.g2.com/products/creo-2025-08-26/reviews) |
| --- | --- |
| 4.4/5 (440 reviews) | 4.1/5 (203 reviews) |
| Mid-Market | Enterprise |
| 7.9 | 8.1 |
| 8.1 | 7.8 |
| Ease of use and intuitive interface | Advanced parametric modeling and handling large assemblies |



### How do the pricing models of Inventor and Creo compare?

Inventor is rated higher for value, with reviewers expressing greater satisfaction with its price-to-feature ratio compared to Creo.

- **Inventor:** Reviewers note that Inventor is considered affordable for its feature set, with several highlighting its value for both beginners and professionals.
- **Creo:** Reviewers frequently mention that Creo is expensive and more suited for large organizations, with advanced modules adding to the cost.
- **Switching reasons:** In recent reviews, buyers cite cost and ease of use as primary reasons for choosing Inventor over Creo.



### What are the best alternatives to Inventor and Creo?

The top three alternatives to Inventor and Creo are SOLIDWORKS, Onshape, and Designcenter Solid Edge.

| Product | G2 Rating (reviews) | Largest Segment | Pricing Insight | Top Reviewer-Cited Strength |
| --- | --- | --- | --- | --- |
| [Inventor](https://www.g2.com/products/inventor/reviews) | 4.4/5 (440 reviews) | Mid-Market | Affordable for its features | Ease of use and intuitive interface |
| [Creo](https://www.g2.com/products/creo-2025-08-26/reviews) | 4.1/5 (203 reviews) | Enterprise | Expensive, enterprise-focused | Advanced parametric modeling and handling large assemblies |
| [SOLIDWORKS](https://www.g2.com/products/solidworks/reviews) | 4.5/5 (646 reviews) | Small-Business | — | Widely recognized for robust modeling and industry adoption |
| [Onshape](https://www.g2.com/products/onshape/reviews) | 4.7/5 (725 reviews) | Small-Business | — | Cloud-based collaboration and ease of access |
| [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) | 4.3/5 (648 reviews) | Small-Business | — | Flexible modeling and integration capabilities |



### Which Mechanical Computer-aided Design (MCAD) features should I prioritize when comparing Inventor and Creo?

Buyers comparing Inventor and Creo should prioritize Modeling, Ease of Use, Assembly Management, Integration Capabilities, and Simulation.

- **Modeling:** Inventor (all-time mentions: 1), Creo (all-time mentions: 7); Creo is more frequently cited for advanced modeling capabilities.
- **Ease of Use:** Inventor (score: 8.4, all-time mentions: 4), Creo (score: 7.5, all-time mentions: 10); Inventor scores higher, but Creo is also widely recognized for usability in recent reviews.
- **Assembly Management:** Inventor (all-time mentions: 1), Creo (all-time mentions: 6); Creo is favored for handling large and complex assemblies.
- **Integration Capabilities:** Inventor (all-time mentions: 1), Creo (all-time mentions: 5); Both products are cited for integration, with Creo noted for PLM integrations.
- **Simulation:** Inventor (recent reviews highlight simulation and FEA), Creo (all-time mentions: 4); Both products are recognized for simulation, with Creo offering advanced built-in tools.



### What are the pros and cons of Inventor vs Creo?

Inventor's headline strength is ease of use and intuitive interface, while Creo excels in advanced parametric modeling and handling large assemblies.

- **Inventor strengths:** Ease of use (all-time mentions: 4), intuitive interface, efficient for both beginners and professionals, strong integration with Autodesk products, and robust 3D modeling capabilities.
- **Inventor trade-offs:** Reviewers note occasional crashes with large assemblies, a steep learning curve for advanced features, and limited electrical and sheet metal tools without additional licenses.
- **Creo strengths:** Advanced parametric modeling (all-time mentions: 7), efficient handling of large and complex assemblies (all-time mentions: 6), robust simulation tools, and strong PLM integration (notably with Windchill).
- **Creo trade-offs:** Reviewers cite a steep learning curve (all-time mentions: 4), resource-intensive performance with large datasets, and higher cost, especially for advanced modules.



### Is Inventor or Creo better for small businesses?

Inventor is the better fit for small businesses, as reflected by its largest reviewer segment and positive sentiment from small-business users.

- **Inventor:** Mid-Market is the largest segment, with many small-business reviewers praising its affordability, ease of use, and quick learning curve.
- **Creo:** Enterprise is the largest segment, and reviewers note its complexity and higher cost, making it more suitable for larger organizations.



### Which Mechanical Computer-aided Design (MCAD) platform has better integrations?

Inventor and Creo are both recognized for integration capabilities, but Creo is more frequently cited for PLM integrations.

- **Inventor:** Reviewers mention easy integration with other Autodesk products and PDM tools, with recent reviews highlighting integration with Autodesk Vault and Inventor Nastran.
- **Creo:** Windchill is cited in 21 all-time reviews, and Teamcenter in 4, with reviewers emphasizing strong PLM integration and compatibility with enterprise systems.



### How do Inventor and Creo compare on customer support?

Inventor and Creo are rated at parity for Quality of Support, with scores of 8.1 and 7.8 respectively, a difference below the materiality threshold.

- **Inventor:** Reviewers consistently describe customer support as responsive and helpful, with many citing strong online forums and resources.
- **Creo:** Reviewers note professional-grade support, especially for enterprise customers, and highlight effective technical assistance for complex implementations.



### Which is easier to implement, Inventor or Creo?

Creo scores slightly higher on Ease of Setup (8.1 vs. Inventor's 7.9), but the difference is below the materiality threshold, indicating near parity.

- **Inventor:** Reviewers describe setup as straightforward, with many noting that the initial installation and configuration are easy for both beginners and experienced users.
- **Creo:** Reviewers mention that setup is efficient, especially in enterprise environments, but note that onboarding new users can take longer due to the depth of features.



### Which product has better Modeling?

Creo is more frequently cited for advanced Modeling capabilities, but both Inventor and Creo are recognized for strong modeling features.

- **Inventor:** Ease of Use score: 8.4; Modeling (all-time mentions: 1); reviewers highlight intuitive modeling and efficient part creation.
- **Creo:** Ease of Use score: 7.5; Modeling (all-time mentions: 7); reviewers consistently cite advanced parametric modeling, efficient handling of complex assemblies, and robust feature control.



| | Creo | Inventor | 
|---|---|---|
| **Star Rating** | 4.1 out of 5 | 4.4 out of 5 | 
| **Total Reviews** | 203 | 440 | 
| **Largest Market Segment** | Enterprise (37.7% of reviews) | Mid-Market (42.7% of reviews) | 
| **Entry Level Price** | No pricing available | $2085 1 year | 

---
## Top Pros & Cons

### Creo

Pros:
- Ease of Use (10 reviews)
- Features (9 reviews)

Cons:
- Complexity (4 reviews)
- Not User-Friendly (4 reviews)

### Inventor

Pros:
- Ease of Use (2 reviews)
- 3D Modeling (1 reviews)

Cons:
- Assembly Issues (1 reviews)
- Complexity (1 reviews)

---
## Ratings Comparison
| Rating | Creo | Inventor | 
|---|---|---|
  | **Meets Requirements** | 8.5 (171 reviews) | 8.8 (376 reviews) | 
  | **Ease of Use** | 7.5 (171 reviews) | 8.4 (377 reviews) | 
  | **Ease of Setup** | 8.1 (34 reviews) | 7.9 (107 reviews) | 
  | **Ease of Admin** | 7.4 (15 reviews) | 7.7 (99 reviews) | 
  | **Quality of Support** | 7.8 (161 reviews) | 8.1 (346 reviews) | 
  | **Has the product been a good partner in doing business?** | 8.2 (15 reviews) | 8.2 (94 reviews) | 
  | **Product Direction (% positive)** | 7.8 (165 reviews) | 8.3 (371 reviews) | 

---
## Pricing

### Creo

#### Entry-Level Pricing

No pricing available

#### Free Trial

Yes

### Inventor

#### Entry-Level Pricing

Plan: 1 Year

Price: $2085 1 year

Description: Choose online store or reseller or call toll-free 1-844-821-0545.


[Browse all 4 editions](https://www.g2.com/products/inventor/pricing)

#### Free Trial

Yes

---
## Features Comparison By Category

### 3D Modeling

| Product | Score | Reviews |
|---|---|---|
| **Creo** | 8.1/10 | 89 |
| **Inventor** | N/A | N/A |

#### Design

| Feature | Creo | Inventor | 
|---|---|---|
| **Sculpting** | 7.9 (66 reviews) | Not enough data | 
| **Topology** | 8.3 (61 reviews) | Not enough data | 
| **Drawing** | 8.8 (78 reviews) | Not enough data | 
| **Brush Variety ** | 7.6 (60 reviews) | Not enough data | 
| **Effects** | 8.2 (68 reviews) | Not enough data | 

#### Move

| Feature | Creo | Inventor | 
|---|---|---|
| **Animate** | 8.1 (68 reviews) | Not enough data | 
| **Render** | 7.9 (71 reviews) | Not enough data | 
| **Views** | 8.8 (77 reviews) | Not enough data | 

#### Store & Manage

| Feature | Creo | Inventor | 
|---|---|---|
| **Pipeline ** | 8.5 (63 reviews) | Not enough data | 
| **Controls** | 8.7 (73 reviews) | Not enough data | 
| **Template library ** | 8.3 (74 reviews) | Not enough data | 

#### Generative AI

| Feature | Creo | Inventor | 
|---|---|---|
| **AI Text-to-Image** | 6.9 (15 reviews) | Not enough data | 
| **AI Text-to-3D** | 7.2 (16 reviews) | Not enough data | 

### General-Purpose CAD

| Product | Score | Reviews |
|---|---|---|
| **Creo** | 8.7/10 | 38 |
| **Inventor** | 8.2/10 | 38 |

#### Design

| Feature | Creo | Inventor | 
|---|---|---|
| **Drawing** | 9.1 (36 reviews) | 8.6 (37 reviews) | 
| **Modeling** | 9.3 (36 reviews) | 8.9 (37 reviews) | 
| **Visualize ** | 8.8 (36 reviews) | 8.5 (38 reviews) | 
| **Rendering** | 8.2 (35 reviews) | 7.6 (35 reviews) | 

#### Edit

| Feature | Creo | Inventor | 
|---|---|---|
| **File Import ** | 8.9 (36 reviews) | 8.2 (37 reviews) | 
| **Push/Pull** | 8.3 (34 reviews) | 7.4 (36 reviews) | 
| **Views** | 8.7 (36 reviews) | 8.0 (37 reviews) | 
| **Grips ** | 8.3 (32 reviews) | 7.7 (36 reviews) | 

#### Collaboration

| Feature | Creo | Inventor | 
|---|---|---|
| **Annotate** | 8.5 (35 reviews) | 8.1 (36 reviews) | 
| **Documentation ** | 8.5 (34 reviews) | 8.6 (36 reviews) | 
| **Data Extract** | 8.7 (33 reviews) | 8.2 (36 reviews) | 

#### Additional Functionality

| Feature | Creo | Inventor | 
|---|---|---|
| **API** | Not enough data | Not enough data | 
| **Image Editing** | Not enough data | Not enough data | 
| **Activity Dashboard** | Not enough data | Not enough data | 
| **Animation** | Not enough data | Not enough data | 
| **Reference Management** | Not enough data | Not enough data | 
| **Secure Data Storage** | Not enough data | Not enough data | 
| **Third-Party Integrations** | Not enough data | Not enough data | 
| **Configuration Management** | Not enough data | Not enough data | 
| **Annotations** | Not enough data | Not enough data | 
| **Drag & Drop** | Not enough data | Not enough data | 
| **Data Synchronization** | Not enough data | Not enough data | 
| **For 3D Printing** | Not enough data | Not enough data | 
| **Customizable Templates** | Not enough data | Not enough data | 
| **Modeling & Simulation** | Not enough data | Not enough data | 
| **For Manufacturers** | Not enough data | Not enough data | 
| **Multiple Format Support** | Not enough data | Not enough data | 
| **Workflow Management** | Not enough data | Not enough data | 
| **Version Control** | Not enough data | Not enough data | 
| **Document Management** | Not enough data | Not enough data | 
| **Sketching and Annotation Tools** | Not enough data | Not enough data | 
| **Multiple Projects** | Not enough data | Not enough data | 
| **For Architects** | Not enough data | Not enough data | 
| **Content Library** | Not enough data | Not enough data | 
| **Bill of Materials Management** | Not enough data | Not enough data | 
| **Collaboration Tools** | Not enough data | Not enough data | 
| **Design Management** | Not enough data | Not enough data | 
| **Rules-Based Workflow** | Not enough data | Not enough data | 
| **Reporting/Analytics** | Not enough data | Not enough data | 
| **Data Visualization** | Not enough data | Not enough data | 
| **Generative AI** | Not enough data | Not enough data | 
| **Data Capture and Transfer** | Not enough data | Not enough data | 
| **Projections** | Not enough data | Not enough data | 
| **AI Copilot** | Not enough data | Not enough data | 
| **Real Time Comparisons** | Not enough data | Not enough data | 
| **Document Generation** | Not enough data | Not enough data | 
| **Component Library** | Not enough data | Not enough data | 
| **Compliance Management** | Not enough data | Not enough data | 
| **Customizable Branding** | Not enough data | Not enough data | 
| **File Management** | Not enough data | Not enough data | 
| **Real-Time Updates** | Not enough data | Not enough data | 
| **Configurable Workflow** | Not enough data | Not enough data | 

### Additive Manufacturing

| Product | Score | Reviews |
|---|---|---|
| **Creo** | N/A | N/A |
| **Inventor** | N/A | N/A |

#### File Support - Additive Manufacturing

| Feature | Creo | Inventor | 
|---|---|---|
| **STL Compatible** | Not enough data | Not enough data | 
| **3MF Compatible** | Not enough data | Not enough data | 
| **OBJ Compatible** | Not enough data | Not enough data | 

#### File Editing - Additive Manufacturing

| Feature | Creo | Inventor | 
|---|---|---|
| **Mesh Repair** | Not enough data | Not enough data | 
| **File Editing** | Not enough data | Not enough data | 

#### Software Integrations - Additive Manufacturing

| Feature | Creo | Inventor | 
|---|---|---|
| **Standalone Slicer** | Not enough data | Not enough data | 
| **Inetgrated 3D Modeling** | Not enough data | Not enough data | 

#### Software Type - Additive Manufacturing

| Feature | Creo | Inventor | 
|---|---|---|
| **Cloud-based Platform** | Not enough data | Not enough data | 
| **Downloadable Application** | Not enough data | Not enough data | 

#### Generative AI - Additive Manufacturing

| Feature | Creo | Inventor | 
|---|---|---|
| **AI Text-to-Image** | Not enough data | Not enough data | 
| **AI Text-to-3D** | Not enough data | Not enough data | 

#### Building Preparation - Additive Manufacturing

| Feature | Creo | Inventor | 
|---|---|---|
| **Material Management** | Not enough data | Not enough data | 
| **Building Simulation** | Not enough data | Not enough data | 
| **Slicing Optimization** | Not enough data | Not enough data | 

### Simulation & CAE

| Product | Score | Reviews |
|---|---|---|
| **Creo** | 7.8/10 | 22 |
| **Inventor** | 7.5/10 | 20 |

#### Design

| Feature | Creo | Inventor | 
|---|---|---|
| **3D/solid modeling Tools** | 9.0 (21 reviews) | 9.0 (20 reviews) | 
| **Drawing Tools** | 8.8 (19 reviews) | 8.6 (20 reviews) | 
| **Editing Tools** | 8.7 (19 reviews) | 8.7 (20 reviews) | 
| **Rendering tools** | 8.1 (19 reviews) | 7.6 (19 reviews) | 
| **Stochastic Modeling** | Not enough data | Not enough data | 
| **Presentation Tools** | Not enough data | Not enough data | 

#### Tools

| Feature | Creo | Inventor | 
|---|---|---|
| **Fluid analysis** | 7.0 (15 reviews) | 5.6 (16 reviews) | 
| **Finite element analysis** | 7.3 (15 reviews) | 7.5 (19 reviews) | 
| **Multibody dynamics** | 7.3 (13 reviews) | 7.1 (17 reviews) | 
| **Design Analysis** | Not enough data | Not enough data | 

#### Work

| Feature | Creo | Inventor | 
|---|---|---|
| **Discrete event modeling** | 7.0 (11 reviews) | 6.9 (15 reviews) | 
| **Continuous event modeling** | 7.1 (12 reviews) | 6.8 (15 reviews) | 
| **Mechanical event simulation** | 7.3 (14 reviews) | 7.2 (16 reviews) | 
| **Manufacturing process simulation** | 7.4 (14 reviews) | 7.6 (14 reviews) | 
| **Integrate** | 8.3 (14 reviews) | 7.6 (16 reviews) | 
| **Turbulence Modeling** | Not enough data | Not enough data | 
| **Motion Modeling** | Not enough data | Not enough data | 
| **Dynamic Modeling** | Not enough data | Not enough data | 
| **Mathematical Modeling** | Not enough data | Not enough data | 
| **Agent-Based Modeling** | Not enough data | Not enough data | 
| **Monte Carlo Simulation** | Not enough data | Not enough data | 

#### Environment

| Feature | Creo | Inventor | 
|---|---|---|
| **Hardware support** | 8.0 (16 reviews) | 7.7 (17 reviews) | 
| **Task** | 8.0 (16 reviews) | 7.7 (18 reviews) | 
| **Manage Multiple Profiles** | 7.7 (13 reviews) | 6.9 (18 reviews) | 
| **Command Clarity** | 8.5 (14 reviews) | 8.1 (19 reviews) | 

#### Additional Functionality

| Feature | Creo | Inventor | 
|---|---|---|
| **Activity Dashboard** | Not enough data | Not enough data | 
| **Configurable Workflow** | Not enough data | Not enough data | 
| **API** | Not enough data | Not enough data | 
| **Data Verification** | Not enough data | Not enough data | 
| **Data Visualization** | Not enough data | Not enough data | 
| **Generative AI** | Not enough data | Not enough data | 
| **3D Imaging** | Not enough data | Not enough data | 
| **Projections** | Not enough data | Not enough data | 
| **Data Import/Export** | Not enough data | Not enough data | 
| **Design Management** | Not enough data | Not enough data | 
| **Drag & Drop** | Not enough data | Not enough data | 
| **Real-Time Monitoring** | Not enough data | Not enough data | 
| **Version Control** | Not enough data | Not enough data | 
| **Visual Analytics** | Not enough data | Not enough data | 
| **Third-Party Integrations** | Not enough data | Not enough data | 
| **Access Controls/Permissions** | Not enough data | Not enough data | 
| **Workflow Management** | Not enough data | Not enough data | 
| **Direct Manipulation** | Not enough data | Not enough data | 
| **Scenario Planning** | Not enough data | Not enough data | 
| **Product Data Management** | Not enough data | Not enough data | 
| **Predictive Analytics** | Not enough data | Not enough data | 
| **Change Management** | Not enough data | Not enough data | 
| **Process Control** | Not enough data | Not enough data | 
| **Customization** | Not enough data | Not enough data | 
| **Content Library** | Not enough data | Not enough data | 
| **Document Management** | Not enough data | Not enough data | 
| **Real-Time Data** | Not enough data | Not enough data | 
| **Reporting & Statistics** | Not enough data | Not enough data | 
| **Rules-Based Workflow** | Not enough data | Not enough data | 
| **File Management** | Not enough data | Not enough data | 
| **Compliance Management** | Not enough data | Not enough data | 
| **Policy Management** | Not enough data | Not enough data | 
| **Graphical Data Presentation** | Not enough data | Not enough data | 
| **Customizable Reports** | Not enough data | Not enough data | 
| **Graphical Workflow Editor** | Not enough data | Not enough data | 
| **Reporting/Analytics** | Not enough data | Not enough data | 
| **Industry Specific Database** | Not enough data | Not enough data | 
| **Project Workflow** | Not enough data | Not enough data | 
| **AI Copilot** | Not enough data | Not enough data | 
| **Performance Management** | Not enough data | Not enough data | 

### Mechanical Computer-aided Design (MCAD)

| Product | Score | Reviews |
|---|---|---|
| **Creo** | 8.5/10 | 16 |
| **Inventor** | 9.0/10 | 6 |

#### Tools - Mechanical Computer-aided Design (MCAD)

| Feature | Creo | Inventor | 
|---|---|---|
| **3D/solid modeling Tools** | 9.2 (13 reviews) | 9.0 (5 reviews) | 
| **Rendering Tools** | 8.3 (8 reviews) | Not enough data | 
| **Drawing Tools** | 8.9 (9 reviews) | 9.3 (5 reviews) | 
| **Editing Tools** | 8.8 (8 reviews) | Not enough data | 
| **Text Editing Tools** | 7.9 (7 reviews) | Not enough data | 

#### File Options - Mechanical Computer-aided Design (MCAD)

| Feature | Creo | Inventor | 
|---|---|---|
| **Export Files** | 9.4 (9 reviews) | Not enough data | 
| **Import Files** | 9.3 (9 reviews) | Not enough data | 
| **File Interoperability** | 8.5 (10 reviews) | 9.3 (5 reviews) | 
| **Backwards compatibility** | 8.8 (8 reviews) | Not enough data | 
| **File size** | 8.5 (10 reviews) | 8.3 (5 reviews) | 

#### Customization - Mechanical Computer-aided Design (MCAD)

| Feature | Creo | Inventor | 
|---|---|---|
| **Custom Commands** | 8.1 (7 reviews) | Not enough data | 
| **Custom Scripts** | 8.1 (8 reviews) | Not enough data | 
| **Custom Menus** | 8.8 (8 reviews) | Not enough data | 
| **Custom Interface** | 8.1 (7 reviews) | Not enough data | 

#### Environment - Mechanical Computer-aided Design (MCAD)

| Feature | Creo | Inventor | 
|---|---|---|
| **Hardware support** | 8.5 (8 reviews) | Not enough data | 
| **Task-based interfaces** | 7.7 (8 reviews) | Not enough data | 
| **Manage Multiple Profiles** | 7.9 (8 reviews) | Not enough data | 
| **Command Clarity** | 7.3 (8 reviews) | Not enough data | 

---
## Categories
**Shared Categories (3):** [Mechanical Computer-aided Design (MCAD) Software](https://www.g2.com/categories/mechanical-computer-aided-design-mcad), [General-Purpose CAD Software](https://www.g2.com/categories/general-purpose-cad), [Simulation & CAE Software](https://www.g2.com/categories/simulation-cae)

**Unique to Creo (2):** [3D Modeling Software](https://www.g2.com/categories/3d-modeling), [Additive Manufacturing Software](https://www.g2.com/categories/additive-manufacturing)



---
## Reviewer Demographics

### By Company Size

| Segment | Creo | Inventor | 
|---|---|---|
| **Small-Business** | 26.7% | 35.0% | 
| **Mid-Market** | 35.6% | 42.7% | 
| **Enterprise** | 37.7% | 22.3% | 

### By Industry

#### Creo

- **Mechanical or Industrial Engineering:** 22.1%
- **Automotive:** 20.5%
- **Design:** 14.2%
- **Electrical/Electronic Manufacturing:** 5.8%
- **Machinery:** 4.7%
- **Airlines/Aviation:** 3.2%
- **Defense & Space:** 3.2%
- **Aviation & Aerospace:** 2.6%
- **Consumer Goods:** 2.6%
- **Consumer Electronics:** 2.1%
- **Other:** 18.9%

#### Inventor

- **Mechanical or Industrial Engineering:** 24.9%
- **Machinery:** 7.8%
- **Design:** 7.1%
- **Construction:** 5.0%
- **Oil & Energy:** 3.8%
- **Utilities:** 3.8%
- **Automotive:** 2.6%
- **Electrical/Electronic Manufacturing:** 2.6%
- **Industrial Automation:** 2.4%
- **Education Management:** 2.4%
- **Other:** 37.7%

---
## Alternatives

### Alternatives to Creo

- [SOLIDWORKS](https://www.g2.com/products/solidworks/reviews) — 4.5/5 stars (690 reviews)
- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (661 reviews)
- [Autodesk Fusion](https://www.g2.com/products/autodesk-fusion/reviews) — 4.5/5 stars (519 reviews)
- [Designcenter](https://www.g2.com/products/designcenter/reviews) — 4.4/5 stars (675 reviews)
- [Blender](https://www.g2.com/products/blender/reviews) — 4.6/5 stars (318 reviews)
- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1326 reviews)
- [CATIA](https://www.g2.com/products/catia/reviews) — 4.2/5 stars (256 reviews)
- [Rhinoceros](https://www.g2.com/products/rhinoceros/reviews) — 4.4/5 stars (192 reviews)
- [AutoCAD](https://www.g2.com/products/autocad/reviews) — 4.4/5 stars (1962 reviews)
- [FreeCAD](https://www.g2.com/products/freecad/reviews) — 4.1/5 stars (61 reviews)

### Alternatives to Inventor

- [Onshape](https://www.g2.com/products/onshape/reviews) — 4.7/5 stars (724 reviews)
- [SOLIDWORKS](https://www.g2.com/products/solidworks/reviews) — 4.5/5 stars (690 reviews)
- [Designcenter Solid Edge](https://www.g2.com/products/designcenter-solid-edge/reviews) — 4.3/5 stars (661 reviews)
- [IronCAD](https://www.g2.com/products/ironcad/reviews) — 4.4/5 stars (43 reviews)
- [CATIA](https://www.g2.com/products/catia/reviews) — 4.2/5 stars (256 reviews)
- [Rhinoceros](https://www.g2.com/products/rhinoceros/reviews) — 4.4/5 stars (192 reviews)
- [FreeCAD](https://www.g2.com/products/freecad/reviews) — 4.1/5 stars (61 reviews)
- [SolidWorks Simulation](https://www.g2.com/products/dassault-systemes-solidworks-simulation/reviews) — 4.4/5 stars (60 reviews)
- [SketchUp](https://www.g2.com/products/sketchup/reviews) — 4.5/5 stars (1326 reviews)
- [Designcenter](https://www.g2.com/products/designcenter/reviews) — 4.4/5 stars (675 reviews)

---
## Top Discussions

### Creo

- Title: [What is Creo Parametric used for?](https://www.g2.com/discussions/what-is-creo-parametric-used-for) — 2 comments, 2 upvotes
  > **Top comment:** "Creo Parametric is a 3D CAD software used for designing, modeling, and simulating mechanical components. It supports parametric modeling, assembly design,..."
- Title: [Who uses Creo Parametric?](https://www.g2.com/discussions/who-uses-creo-parametric) — 1 comment, 1 upvote
  > **Top comment:** "its a 3d,2d Computer aided design software. being used in industries at R&D departments to design new products, validate and improve existing design. 
"
- Title: [Why Creo is called parametric?](https://www.g2.com/discussions/why-creo-is-called-parametric) — 1 comment
  > **Top comment:** "The models in Creo should be created with parameters (dimensions and associations between shapes) to fully define the part/model

Creo also has a..."

### Inventor

- Title: [What are some of the best practices for students working in groups to use Inventor?](https://www.g2.com/discussions/what-are-some-of-the-best-practices-for-students-working-in-groups-to-use-inventor) — 2 comments, 1 upvote
  > **Top comment:** "Hi, to be honest with you, I would work with a consultant on that. It shouldn't take more than a day for a consultant to help with a report that will answer..."
- Title: [How do you handle the data creation problem?](https://www.g2.com/discussions/how-do-you-handle-the-data-creation-problem) — 2 comments, 1 upvote
  > **Top comment:** "You basically need to create each model from scratch in Inventor. You can copy your AutoCAD in Inventor and extrude the models but the models won't be..."
- Title: [Is integration with other Autodesk products being considered?](https://www.g2.com/discussions/15145-is-integration-with-other-autodesk-products-being-considered) — 2 comments, 1 upvote
  > **Top comment:** "Autodesk published a video on how to export Inventor parts to Revit here: https://www.youtube.com/watch?v=ue7-WtyiUtI"
- Title: [Is there a good place to look for more advanced tutorials/examples for iLogic?](https://www.g2.com/discussions/13895-is-there-a-good-place-to-look-for-more-advanced-tutorials-examples-for-ilogic) — 2 comments, 1 upvote
  > **Top comment:** "I'm not aware of a flat out repository for examples, but there is a fantastic thread on the Inventor forum that showcases a ton of different examples. If you..."
- Title: [there is a form to get more realistic renders from inventor?](https://www.g2.com/discussions/12147-there-is-a-form-to-get-more-realistic-renders-from-inventor) — 2 comments, 1 upvote
  > **Top comment:** "Max can load Inventor files natively, so that's certainly one option.

The render engine in Inventor is pretty good, though. There is a great deal of ..."

---
**Source:** [G2.com](https://www.g2.com) | [Comparison Page](https://www.g2.com/compare/creo-2025-08-26-vs-inventor)